Re: Asus S510UQ Elantech touchpad support
Vladimir Kondratyev <[email protected]> Tue, 24 Apr 2018 13:37:57 +0300
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Microsoft specs contain nothing about PS/2 touchpads. They describe only devices connected through HID-capable buses like USB or IC2 [1] So appearance of PS/2-less touchpads is expected. [1] https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-device-bus-connectivity On 2018-04-24 07:14, J.R. Oldroyd wrote: > I should have reported that I already tried that! No difference. > > This might be an IRQ problem rather than lack of driver support... > > psm0: unable to allocate IRQ > > -jr > > > On Tue, 24 Apr 2018 03:54:08 +0000 Tim - PortableUNIX > <[email protected]> wrote: >> >> J.R., >> >> That is an Elantech. Try hw.psm.elantech_support="1" in >> /boot/loader.conf >> >> Thank you, >> Tim >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of J.R. Oldroyd >> Sent: Monday, April 23, 2018 7:10 PM >> To: [email protected] >> Subject: Asus S510UQ Elantech touchpad support >> >> A few weeks ago, I posted to questions@ with an overview of FreeBSD >> running on an Asus 15-S510UQ. All works well, except the >> mouse/touchpad which does not work at all. >> >> Looking into this more, the touchpad appears to be an Elantech device >> of some sort, maybe a 1300 or 7001 series. When I boot OpenBSD on a >> USB stick, there are messages to that effect. OpenBSD appears to >> support this device in their wsmouse and usb_hid drivers. >> >> Is there any development of this here in FreeBSD? >> >> If not, what would be the best approach to getting support added, in >> terms of what existing driver mods are needed and what new ones? >> >> -jr >> >> >> -- Reposted from feeebsd-questions@ on Thu Mar 22 14:48:58 UTC 2018: >> >> Just put FreeBSD 12-CURRENT on an Asus VivoBook 15-S510UQ and I'm very >> happy to report that almost everything works with simply minor config. >> >> System overview (all working): >> >> CPU: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (1992.09-MHz K8-class >> CPU) >> Mem: 8Gb (expandable to 16Gb) >> HDD: 1Tb (Toshiba MQ04ABF100) >> SSD: 128Mb (Toshiba THNSNK128GVN8) >> Ether: none >> WiFi: Intel(R) Dual Band Wireless AC 8265 (works on 12-CURRENT) >> Video: Intel UHD Graphics 620 (1920x1080) >> Audio: Intel Kabylake (HDMI/DP 8ch) >> Webcam: Azurewave USB2.0 VGA UVC WebCam >> >> Even ACPI S3 suspend/resume appears to work just fine with video and >> WiFi restarting properly after the resume. >> >> The things not working yet are: >> >> Mouse: unknown type (not yet working) >> Video2: NVIDIA GM108M [GeForce 940MX] (not yet working) >> BT: usb device (vendor 0x8087 product 0x0a2b) (not yet working) >> >> I am using a USB mouse for now, which works fine. The built-in >> mouse/touchpad/fingerprint reader is not detected. Any suggestions >> for that would be appreciated. >> >> I have not yet got the NVIDIA 940MX going, but I haven't really looked >> into which drivers are needed for that yet. >> >> Finally, there's a bluetooth device too, but I have not yet looked at >> that, either. >> >> dmesg: http://opal.com/jr/asus_s510uq/dmesg.txt >> pciconf: http://opal.com/jr/asus_s510uq/pciconf.txt >> usbconfig: http://opal.com/jr/asus_s510uq/usbconfig.txt >> _______________________________________________ >> [email protected] mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-mobile >> To unsubscribe, send any mail to >> "[email protected]" >> > > _______________________________________________ > [email protected] mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to > "[email protected]" -- WBR Vladimir Kondratyev _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"