Re: Memory Stick Slot on Sony GR300

Okay, for fun, I decided to try upgrading to -STABLE (currently 4.7-PR)
to see if that made any difference. Now, instead of showing up as a ugen
device, the Memory Stick Slot does appear as a umass:
umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2

However, it also takes a long time to boot, since I have to see the
following set of messages 4 times:
umass0: CBI reset failed, TIMEOUT
umass0: CBI bulk-in stall clear failed, TIMEOUT
umass0: CBI bulk-out stall clear failed, TIMEOUT

BTW, I'm crossposting this to -stable since it's now a PR box (cvsupped
and compiled this morning) and this may be annoying for other users of
this laptop if they try to upgrade, since the first error message takes
a while to display, they may think the kernel has hung.

On Fri, 2002-09-13 at 11:16, Chip Marshall wrote:
> Hi, I've got a Sony VAIO GR300 running FreeBSD 4.6-RELEASE, and I was
> wondering if it would be possible to use the built-in memory stick slot
> on this model. It appears to be connected via USB to the laptop, however
> it's being attached to ugen, which makes it somewhat unuseful.
> 
> dmesg output:
> ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
> 
> usbdevs -v output:
> Controller /dev/usb2:
> addr 1: self powered, config 1, UHCI root hub(0x0000),
> (0x24878086)(0x0000), rev 0x0100
>  port 1 addr 2: power 100 mA, config 1, USB Memory Stick Slot(0x0056),
> Sony(0x054c), rev 0x0183
>  port 2 powered

-- 
Chip Marshall <[email protected]>           http://www.chocobo.cx/chip/
GCM/CS d+(-) s+:++ a21>? C++ UB++++$ P+++$ L- E--- W++ N@ o K- w O M+
V-- PS+ PE Y+ PGP++ t+@ R@ tv@ b++@ DI++++ D+(-) G++ e>++ h>++ r++ y?

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (FreeBSD)

iD8DBQA9gigv8vyTVl6qbdQRAqXKAJsGhg3CSCXSg1t6g7Qf1uybnkt1NACgivcB
6Ix3QUvMg8RJpzgFFXYvzcY=
=n9LB
-----END PGP SIGNATURE-----