Re: Intel Mobile fxp Cardbus cards supported?
Vincent Poy <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Fri, 20 Sep 2002, M. Warner Losh wrote: > In message: <[email protected]> > Vincent Poy <[email protected]> writes: > : Which model of the cardbus card are you using? I'm going to try > : the MBLA3300C3 next which is the one without the modem. > > MBLA3300 is the one that I've used. > > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1000-0x103f mem 0xf4020000-0xf403ffff,0xf4040000-0xf4040fff irq 10 at device 0.0 on cardbus0 > fxp0: Disabling dynamic standby mode in EEPROM > fxp0: New EEPROM ID: 0x4880 > fxp0: EEPROM checksum @ 0xff: 0x7a17 -> 0x7a19 > fxp0: Ethernet address 00:d0:b7:02:0e:f6 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > is what dmesg says when I insert the card. I've not used it in a > little while, but the new EEPROM ID is something I should look into. After trying the MBLA3300, MBLA3300C3, MBLA3356C3 on both the IBM ThinkPad 770Z and the Dell Inspiron 8200, all three cards had the following results: cardbus0: Expecting link target, got 0xff cardbus0: Resource not specified in CIS: id=10, size=1000 cardbus0: Resource not specified in CIS: id=14, size=40 cardbus0: Resource not specified in CIS: id=18, size=20000 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1000-0x103f mem 0x88000000-0x8801ffff,0x88020000-0x88020fff irq 11 at device 0.0 on cardbus0 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0xfffd fxp0: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9 fxp0: Ethernet address ff:ff:ff:ff:ff:ff, 10Mbps It seems like the autonegotition for 10/100 HDX/FDX is failing as the dc0 and xl0 with the same cable sees 100FDX correctly. ifconfig fxp0 output: fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 ether ff:ff:ff:ff:ff:ff media: Ethernet manual As soon as I issue the following to configure the interface: ifconfig fxp0 inet 209.204.138.100 netmask 255.255.255.0 I get the following repeatedly non-stop: fxp0: SCB timeout: 0xff 0xff 0xff 0xffff fxp0: DMA timeout fxp0: SCB timeout: 0xff 0xff 0xff 0xffff fxp0: DMA timeout fxp0: SCB timeout: 0xff 0xff 0xff 0xffff fxp0: DMA timeout fxp0: SCB timeout: 0xff 0xff 0xff 0xffff fxp0: DMA timeout fxp0: SCB timeout: 0xff 0xff 0xff 0xffff Cheers, Vince - [email protected] - Vice President ________ __ ____ Unix Networking Operations - FreeBSD-Real Unix for Free / / / / | / |[__ ] WurldLink Corporation / / / / | / | __] ] San Francisco - Honolulu - Hong Kong / / / / / |/ / | __] ] HongKong Stars/Gravis UltraSound Mailing Lists Admin /_/_/_/_/|___/|_|[____] Almighty1@IRC - oahu.DAL.NET Hawaii's DALnet IRC Network Server Admin To Unsubscribe: send mail to [email protected] with "unsubscribe freebsd-mobile" in the body of the message