Re: Sierra Wireless Aircard 750 GSM/GPRS

Since my last posting I have made some progress with this card under Linux. 
Under the guidance of the Sierra folks the card works with the standard serial 
driver using the cis flag. This points to a separate binary file that 
overrides the card probe and explicitly tells the machine what the card CIS 
info is. Any suggestions on how to do this under freebsd? Alternatively, any 
suggestions on how to extract the relevant info from the cis file to make the 
freebsd driver work. Here's the output from 'cardctl config' under linux:

Socket 1:
  Vcc 5.0V  Vpp1 0.0V  Vpp2 0.0V
  interface type is "memory and I/O"
  irq 3 [exclusive] [level]
  speaker output is enabled
  function 0:
    config base 0x0700
      option 0x61 status 0x08 ext 0x00
    io 0x02f8-0x02ff [8bit]

Many thanks,

Julian

> In message: <[email protected]>
>             Jason Andresen <[email protected]> writes:
> : Kirill Bezzubets wrote:
> : > 
> : > On Mon, Oct 14, 2002 at 04:49:41PM +0100, Julian Chesterfield wrote:
> : > 
> : > >
> : > > sio4 at port 0x240-0x27f irq 9 flags 0x40000 slot 0 on pccard0
> : > > sio4: type 8250
> : > 
> : > 8250?.. Hmm.. Even my old USR Megahertz shows up as 16550A sio..
> : 
> : Isn't this what FreeBSD defaults to if it doesn't recognise your
> : card?  It might just be a case of adding your card's ID to a 
> : switch statement.  
> 
> 8250 means that we can't really ID the FIFO.  Also, 0x240-0x27f is
> kinda an odd range.  I'm thinking that maybe 0x278 is where the FIFO
> starts...
> 
> Warner
> 
> To Unsubscribe: send mail to [email protected]
> with "unsubscribe freebsd-mobile" in the body of the message



To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message