Re: Wireless Card ATMEL AT76C502AR

Dirk-Willem van Gulik <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
The ATMEL cards require a different driver; one which is AFAIK not part of
FreeBSD yet. ATMEL released details and a GPLed driver for Linux at

	http://atmelwlandriver.sourceforge.net/news.html
see also
	http://www.wireless.org.au/~jhecker/atmeldrv/atmeldrv.html

Dw.

On Fri, 29 Nov 2002, Robert [unknown-8bit] Blacquière wrote:

> Hi all,
>
>
> I've been trying to get this ATMEL based pccard working. But is seems
> there is/are some points missing or thing i'me doing wrong...
>
> Snipped info from /etc/pccard.conf
>
> card "ATMEL" "AT76C502AR"
>     config auto "wi" ? 0x10000
>     insert /etc/pccard_ether $device start
>     remove /etc/pccard_ether $device stop
>
> Output of the insert action...
>
> Nov 29 17:01:04 dori pccardd[599]: Card "ATMEL"("AT76C502AR") [(null)]
> [(null)] matched "ATMEL" ("AT76C502AR") [(null)] [(null)]
> Nov 29 17:01:14 dori /kernel: wi0 at port 0x240-0x27f irq 11 flags
> 0x10000 slot 1 on pccard1
> Nov 29 17:01:14 dori /kernel: wi0: timeout in wi_cmd 0x0000; event
> status 0x0000
> Nov 29 17:01:14 dori last message repeated 2 times
> Nov 29 17:01:14 dori /kernel: wi0: init failed
> Nov 29 17:01:14 dori /kernel: wi0: timeout in wi_cmd 0x0021; event
> status 0x0000
> Nov 29 17:01:14 dori /kernel: wi0: timeout in wi_cmd 0x0021; event
> status 0x0000
> Nov 29 17:01:14 dori /kernel: wi0: mac read failed 5
> Nov 29 17:01:14 dori /kernel: device_probe_and_attach: wi0 attach
> returned 5
> Nov 29 17:01:14 dori pccardd[599]: driver allocation failed for
> ATMEL(AT76C502AR): Input/output error
>
>
> And also an other try:
>
> with:
> card "ATMEL" "AT76C502AR"
>     config auto "wi" ?
>     insert /etc/pccard_ether $device start
>     remove /etc/pccard_ether $device stop
>
>
>
> Nov 29 17:10:24 dori /kernel: pccard: card inserted, slot 1
> Nov 29 17:10:29 dori pccardd[599]: Card "ATMEL"("AT76C502AR") [(null)]
> [(null)] matched "ATMEL" ("AT76C502AR") [(null)] [(null)]
> Nov 29 17:10:39 dori /kernel: wi0 at port 0x240-0x27f irq 11 slot 1 on
> pccard1
> Nov 29 17:10:40 dori /kernel: wi0: timeout in wi_cmd 0x0000; event
> status 0x0000
> Nov 29 17:10:40 dori last message repeated 2 times
> Nov 29 17:10:40 dori /kernel: wi0: init failed
> Nov 29 17:10:40 dori /kernel: wi0: timeout in wi_cmd 0x0021; event
> status 0x0000
> Nov 29 17:10:40 dori /kernel: wi0: timeout in wi_cmd 0x0021; event
> status 0x0000
> Nov 29 17:10:40 dori /kernel: wi0: mac read failed 5
> Nov 29 17:10:40 dori /kernel: device_probe_and_attach: wi0 attach
> returned 5
> Nov 29 17:10:39 dori pccardd[599]: driver allocation failed for
> ATMEL(AT76C502AR): Input/output error
>
>
> Has any of you have a setup that works with these card? or some other
> nice info to get it running?
>
> Robert
>


To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.