problem using pcmcia modem on laptop

"Kirill V. Grigoroff" <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
Hello all!

I'm having a problem using my pcmcia modem that I have on my Xircon
card (Xircom CEM56 [16-bit Ethernet + 56k modem]).  When I try to use
kppp with KDE (or ppp with console) it freezes when I try to query the
modem. I couldn't find any references to pcmcia modems in the
handbook, could someone point me in the right direction?

PS: Attached files is "dmesg" output and "pciconf -l" output.
  

-- 
Best regards,
 Kirill                          mailto:[email protected]
dmesg.txt (text/plain, 4.5 KB)
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #5: Tue Dec 31 14:22:05 MSK 2002
    root@:/usr/src/sys/compile/SLUGGARD
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (908.32-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 251592704 (245696K bytes)
avail memory = 241270784 (235616K bytes)
Preloaded elf kernel "kernel" at 0xc0365000.
VESA: v2.0, 16384k memory, flags:0x0, mode table:0xc02f77a0 (1000040)
VESA: Trident CYBER 8820
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f01b0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8820 VGA-compatible display device> at 0.0 irq 11
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: HP HP USB WHEEL MOUSE, rev 1.00/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
atapci0: <AcerLabs Aladdin ATA66 controller> port 0xeff0-0xefff at device 4.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at device 6.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
alpm0: <AcerLabs M15x3 Power Management Unit> at device 8.0 on pci0
alpm0: driver is using old-style compatibility shims
pci0: <unknown card> (vendor=0x8086, dev=0x1059) at 10.0 irq 11
pci_cfgintr_linked: linked (1) to hard-routed irq 11
pci_cfgintr: 0:17 INTA routed to irq 11
pcic0: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 17.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (2) to hard-routed irq 11
pci_cfgintr: 0:17 INTB routed to irq 11
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 17.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
smbus0: <System Management Bus> on alsmb0
smb0: <SMBus general purpose I/O> on smbus0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <SMCf010> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0e03> can't assign resources
ad0: 28615MB <TOSHIBA MK3018GAS> [58140/16/63] at ata0-master UDMA66
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2212> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card inserted, slot 0
xe0 at port 0x2e8-0x2ef iomem 0xd1000-0xd1fff irq 11 slot 0 on pccard0
xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:ed:fd:79
pciconf.txt (text/plain, 895 B)
chip0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x164410b9 rev=0x01 hdr=0x00
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x524710b9 rev=0x00 hdr=0x01
ohci0@pci0:2:0:	class=0x0c0310 card=0x00041179 chip=0x523710b9 rev=0x03 hdr=0x00
atapci0@pci0:4:0:	class=0x0101f0 card=0x00041179 chip=0x522910b9 rev=0xc3 hdr=0x00
pcm0@pci0:6:0:	class=0x040100 card=0x00011179 chip=0x545110b9 rev=0x01 hdr=0x00
isab0@pci0:7:0:	class=0x060100 card=0x00041179 chip=0x153310b9 rev=0x00 hdr=0x00
alpm0@pci0:8:0:	class=0x068000 card=0x00011179 chip=0x710110b9 rev=0x00 hdr=0x00
none0@pci0:10:0:	class=0x020000 card=0x00011179 chip=0x10598086 rev=0x10 hdr=0x00
pcic0@pci0:17:0:	class=0x060700 card=0x00011179 chip=0x06171179 rev=0x32 hdr=0x02
pcic1@pci0:17:1:	class=0x060700 card=0x00011179 chip=0x06171179 rev=0x32 hdr=0x02
none1@pci1:0:0:	class=0x030000 card=0x00011179 chip=0x88201023 rev=0x82 hdr=0x00
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.