Re: Cards that functioned with earlier Current

On Sunday, 12 January 2003 at 11:07:14 -0700, M. Warner Losh wrote:
> OK.  I know why it is doing what it is doing (we changed CIS parsing a
> little bit agi), but I don't know what part of that change caused the
> problem...
>
> Can you tell me if you change hw.cbb.start_memory to soemthing other
> than the default.  Say 0xf8000000 maybe?

Sorry for the previous message, in which I said the card was a 3C905.
In fact, it's the same card we're talking about here:

  Manufacturer ID: 01015751
  Product version: 5.0
  Product name: 3Com Corporation | 3CCFE575BT | LAN Cardbus Card | 001 |
  Functions: Network Adaptor, Memory
  CIS reading done
  cardbus0: Resource not specified in CIS: id=14, size=80
  cardbus0: Resource not specified in CIS: id=18, size=80
  xl0: <3Com 3c575B Fast Etherlink XL> port 0x1080-0x10bf mem 0xf8000000-0xf800007f,0xf8000080-0xf80000ff irq 11 at device 0.0 on cardbus0
  xl0: Ethernet address: 00:10:4b:f8:fd:20
  miibus0: <MII bus> on xl0
  tdkphy0: <TDK 78Q2120 media interface> on miibus0
  tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

I tried this method.  It didn't help.  But then, my problem is
different: it freezes under load, and maybe it's not likely that this
would help.  I have ddb in the kernel, but the machine goes completely
dead, so I can't get in to it.  The machine is a Dell Inspiron 7500.
I'm attaching the complete dmesg.

Greg

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sun Jan 12 19:02:49 CST 2003
    [email protected]:/home/obj/src/FreeBSD/5-CURRENT-SYDNEY/src/sys/SYDNEY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0705000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07050a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 601366912 Hz
CPU: Intel Pentium III (601.37-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134152192 (127 MB)
avail memory = 122785792 (117 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   I 7500 > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 7 entries at 0xc00fdf50
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> at device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 4 INTA is routed to irq 11
cbb1: <TI1225 PCI-CardBus Bridge> at device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 4 INTA is routed to irq 11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
pci0: <simple comms> at device 16.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1287: *** Error: Method execution failed, AE_ERROR
ad0: 24207MB <IBM-DARA-225000> [49184/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-7002B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
Manufacturer ID: 01015751
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575BT | LAN Cardbus Card | 001 |
Functions: Network Adaptor, Memory
CIS reading done
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x1080-0x10bf mem 0xf8000000-0xf800007f,0xf8000080-0xf80000ff irq 11 at device 0.0 on cardbus0
xl0: Ethernet address: 00:10:4b:f8:fd:20
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
--
See complete headers for address and phone numbers

To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message