Xircom RBEM56G-100 on CURRENT

Hello,
	I searched through the list archives for both current and mobile, and 
did find references to making this ethernet adapter work, but not 
actually how to do it.  So here goes...

	I am running FreeBSD 5.0-RC3 on a Toshiba Tecra 8000.  I am trying to 
use a Xircom RealPort CardBus Ethernet 10/100+Modem 56 (RBEM56G-100) on 
it and running into problems.  The device is recognized at boot time, 
yet I am unable to bring it up.  The machine freezes if I try to do 
anything ifconfig-related to the card.
	Has anyone ever had this particular problem, was able to fix it, and 
would be able to provide details on how to do so?  I am only interested 
in the ethernet portion of this card, so if the modem portion cannot 
work it does not matter to me at all.  I have included my dmesg output 
for reference.  I believe I have all necessary features configured in 
the kernel.

Thanks in advance,
Jason


Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC3 #1: Mon Jan 14 07:26:51 PST 2013
     root@:/usr/obj/usr/src/sys/PORTAKOCOL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a8000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04a80a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 147063587 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (147.06-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
 
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory  = 268369920 (255 MB)
avail memory = 255668224 (243 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750     > on motherboard
     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
Using $PIR table, 6 entries at 0xc00f1320
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 
on pci0

ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 
11 at de
vice 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <NEC 765 or clone> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROM> at iomem 0xe4000-0xeffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 38154MB <HITACHI_DK23DA-40> [77520/16/63] at ata0-master UDMA33
acd0: MODE_SENSE_BIG trying to write on read buffer
acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04
acd0: CDROM <CD-224E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a


To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message