Re: trouble with "new" modem

I'm not 100% sure, but I believe it's only possible to have either the
network or modem working.

Cheers,

Mark

On Wed, 2003-01-15 at 17:57, Dan Langille wrote:
> Someone has been kind enough to donate a modem to me:
> 
> Gateway 2000
> Model: XJEM3336 TelePath Combo
> FCC ID: F2M9510014
> 
> dmesg sees this:
> 
> ed1 at port 0x300-0x31f irq 3 slot 0 on pccard0
> ed1: address 00:e0:98:74:5b:af, type NE2000 (16 bit)
> sio4 at port 0x2f8-0x2ff irq 5 flags 0x40000 slot 1 on pccard1
> sio4: type 16550A
> 
> FWIW, I have ed1 working.
> 
> Attempts to get ppp running give "Warning: deflink: /dev/cuaa3: Bad 
> file descriptor".    The device exists.  I've done a MAKEDEV
> 
> # ls -l /dev/cuaa3
> crw-rw----  1 uucp  dialer   28, 131 Jan 15 01:50 /dev/cuaa3
> 
> Here's an attempt:
> 
> 
> [root@laptop:/dev] # ppp
> Working in interactive mode
> Using interface: tun0
> ppp ON laptop> set device /dev/cuaa3
> ppp ON laptop> set speed 115200
> ppp ON laptop> show physical
> Name: deflink
>  State:           closed
>  Device:          N/A
>  Link Type:       interactive
>  Connect Count:   0
>  Queued Packets:  0
>  Phone Number:    N/A
> 
> Defaults:
>  Device List:     "/dev/cuaa3"
>  Characteristics: 115200bps, cs8, no parity, CTS/RTS on
>  CD check delay:  device specific
> 
> Connect time: 0:00:00
> 0 octets in, 0 octets out
> 0 packets in, 0 packets out
> Overall 0 bytes/sec
> ppp ON laptop> term
> Warning: deflink: /dev/cuaa3: Bad file descriptor
> Failed to open /dev/cuaa3
> ppp ON laptop>
> 
> 
> Any clues?
> 
> thanks
-- 
Mark Sergeant <[email protected]>
SNSOnline Technical Services.

To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message