Re: How to make an Intel EtherExpress known to xe(4)?
Scott Mitchell <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Tue, Jan 28, 2003 at 12:21:18PM +1030, Greg 'groggy' Lehey wrote: > > OK, I've tried this one, and it now works on my machine. What would > be the implication of using this code with a card which doesn't return > the FCS? > > Greg All the cards xe supports (those that actually work) have identical Ethernet hardware in them, so this situation shouldn't occur. That comment about not knowing what most of the config bits do was obviously written before I got hold of the programming manual :-) I'll have a look tonight and see what the 'CRC' bit actually does. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" [email protected] | 0xAA775B8B | -- Anon To Unsubscribe: send mail to [email protected] with "unsubscribe freebsd-mobile" in the body of the message