Slow laptop after waking from sleep

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Tue Jan 28 17:41:13 GMT 2003
    [email protected]:/usr/obj/usr/src/sys/LAPTOP50
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0722000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07220a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1129573249 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1129.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 394170368 (375 MB)
avail memory = 375230464 (357 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   L1400B  > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 6 entries at 0xc00f1b50
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82830 (i830M GMCH) SVGA controller> mem 0xe7800000-0xe787ffff,0xf0000000-0xf7ffffff irq 10 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xd800-0xd81f irq 10 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xd400-0xd41f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xe6800000-0xe68000ff irq 9 at device 3.0 on pci1
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:18:93:81:4a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <RF5C475 PCI-CardBus Bridge> irq 10 at device 5.0 on pci1
start (88000000) < sc->membase (e3800000)
end (ffffffff) > sc->memlimit (e6ffffff)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci1: <serial bus, FireWire> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 mem 0xe3000000-0xe30003ff irq 9 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0xe100-0xe13f,0xe000-0xe0ff irq 4 at device 31.5 on pci0
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
system power profile changed to 'economy'
    ACPI-1287: *** Error: Method execution failed, AE_AML_UNINITIALIZED_ELEMENT
start (88000000) < sc->membase (e3800000)
end (ffffffff) > sc->memlimit (e6ffffff)
start (88000000) < sc->membase (e3800000)
end (ffffffff) > sc->memlimit (e6ffffff)
wi0: <Netgear MA401RA> at port 0x100-0x13f irq 10 function 0 config 1 on pccard0
wi0: 802.11 address: 00:09:5b:27:f6:b1
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06
ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2102> at ata0-slave PIO4
MBREXT Slice 5 on ad0s4:
0000   00 fe ff ff 83 fe ff ff 3f 00 00 00 10 ad 03 00  |........?.......|
[0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:240912
0000   00 fe ff ff 05 fe ff ff 4f ad 03 00 24 d3 08 00  |........O...$...|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:240975 l:578340
MBREXT Slice 6 on ad0s4:
0000   00 fe ff ff 82 fe ff ff 3f 00 00 00 e5 d2 08 00  |........?.......|
[0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:578277
0000   00 fe ff ff 05 fe ff ff 73 80 0c 00 5e ae f2 00  |........s...^...|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:819315 l:15904350
MBREXT Slice 7 on ad0s4:
0000   00 fe ff ff 83 fe ff ff 3f 00 00 00 1f ae f2 00  |........?.......|
[0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:15904287
0000   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s2a
acpi_tz0: WARNING - current temperature (33.0C) exceeds system limits
WARNING: pseudo-random number generator used for IPsec processing
system power profile changed to 'performance'
system power profile changed to 'economy'
wi0: detached
wakeup from sleeping state (slept 02:33:46)
ata0: resetting devices ..
    ACPI-0169: *** Error: Could not acquire interpreter mutex
    ACPI-0949: *** Error: AE_TIME while evaluating GPE1b method
    ACPI-0169: *** Error: Could not acquire interpreter mutex
ad0: DMA limited to UDMA33, non-ATA66 cable or device
done
ata1: resetting devices ..
done
start (88000000) < sc->membase (e3800000)
end (ffffffff) > sc->memlimit (e6ffffff)
start (88000000) < sc->membase (e3800000)
end (ffffffff) > sc->memlimit (e6ffffff)
wi0: <Netgear MA401RA> at port 0x100-0x13f irq 10 function 0 config 1 on pccard0
wi0: 802.11 address: 00:09:5b:27:f6:b1
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06