Netgear MA301 wireless adapter problems (in current and stable)

I can't seem to get this Netgear MA301 wireless 
adapter (bridge) recognized.  I see the same problem
in both -current and stable.  I tried putting 
hw.pci.allow_unsupported_io_range='1' in /boot/loader.conf.
I've also made sure that PNP is off in BIOS (it's an
Intel motherboard).   For FreeBSD 5.0 current, I'm 
using pretty much a generic kernel config (cvsupped
today) so wi is alread enabled.  Do I need to configure
this card with windows first?

---------------------------
eclipse# dmesg | grep wi0
wi0: <Netgear MA301> port 0x1080-0x10bf,0x1800-0x187f mem 0xf4209000-0xf4209fff irq 9 at device 16.0 on pci0
wi0: failed in wi_seek to fce0/0
wi0: mac read failed 5
device_probe_and_attach: wi0 attach returned 5

--------------------------------
eclipse# pciconf -lv

<snip>

none1@pci0:16:0:        class=0x028000 card=0x41001385 chip=0x41001385 rev=0x02 hdr=0x00
    vendor   = 'Netgear'
    device   = 'MA301 802.11b Wireless Adapter'
    class    = network
-----------------------------------


Thanks,
--Sam

To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message