Re: CD/CD-RW drive not working on Dell Inspiron 7500

Hi Nick, FreeBSD community,

I just got a Dell Inspiron showing the same error messages under
FreeBSD 4.5 pl3.  Since I saw no followup with a solution I was
wondering whether you got the CD/RW to work (ie. to write writable
and rewritable media).

I can mount and read CDs and a CDRW written on a Yamaha SCSI burner
but 'burncd msinfo' and 'burncd blank' already give errors.  From
my kernel config:

device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
#evice		atapifd			# ATAPI floppy drives
#evice		atapist			# ATAPI tape drives

From /var/log/messages:

Apr 18 11:35:41 i4100 /kernel: acd0: CD-RW <HL-DT-ST CD-RW GCE-8080N> at ata1-master using PIO4
Apr 18 13:30:37 i4100 /kernel: acd0: READ_BIG - MEDIUM ERROR asc=02 ascq=00 error=00
Apr 18 13:31:34 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00
Apr 18 13:31:44 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00
Apr 18 13:33:43 i4100 /kernel: acd0: BLANK_CMD - ILLEGAL REQUEST asc=64 ascq=00 error=00

Bye,

Paul Schenkeveld

On Wed, Oct 17, 2001 at 03:17:22PM -0700, Nick Tonkin wrote:
> 
> Hello FreeBSD folks,
> 
> I cannot get the CD-CD/RW drive to work under FreeBSD 4.4 on my Dell
> inspiron  7500. I know this has been brought up before but I could not
> find a solution.
> 
> The CD drive is made by Matsushita I think, product number is UJDA310L
> 
> Note that the behavior is different depending on whether or not there
> is a disk in tghe drive at boot. When I start the machine with a disk in
> it I get this:
> 
>  root@bomba ~>dmesg | grep -n acd0
> 78:acd0: CDROM <UJDA310 Program Loader> at ata1-master using PIO2
> 86:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 87:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 88:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 89:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 90:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 
> ... and then:
> 
> root@bomba ~>mount /cdrom
> cd9660: /dev/acd0c: Input/output error
> 
> ... whereas if I start the machine without a disk in it, I get:
> 
> root@bomba ~>grep -n acd0 ~nick/foo
> 78:acd0: CD-RW <UJDA310> at ata1-master using PIO4
> 167:acd0: CD-RW <UJDA310> a4 ata1-master using PIO4
> 256:acd0: CD-RW <UJDA310> at ata1-master using PIO4
> 351:acd0: CD-RW <UJDA310> at ata1-master using PIO4
> 358:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 359:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 360:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 361:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00
> 
> ... and then I can open the drive OK, insert a disk, close the drive
> manually (the drawer is not drawn in by the motor as with other CD-ROM
> drives I have used, or as with this one under windoze), and then I get:
> 
> root@bomba ~>mount /cdrom
> cd9660: /dev/acd0c: Input/output error
>  ... followed by the same series of errors.
> 
> Any help greatly appreciated.
> 
> root@bomba ~>uname -a
> FreeBSD bomba.rlnt.net 4.4-RELEASE FreeBSD 4.4-RELEASE #0: Wed Oct 17
> 12:59:32
>  PDT 2001     [email protected]:/usr/src/sys/compile/WITHSOUND  i386
> 
> 
> ~~~~~~~~~~~
> Nick Tonkin
> 
> 
> To Unsubscribe: send mail to [email protected]
> with "unsubscribe freebsd-mobile" in the body of the message

To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message