Re: wi patch
Marcel Moolenaar <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Sat, Mar 01, 2003 at 09:39:10AM -0700, M. Warner Losh wrote:
> These patches make my lucent cards almost useful They are in 1Mbps
> mode, it seems, but at least they work with a fair amount of
> reliability. Don't try to set the media just yet.
"Two thumbs up! -- Ebert & Roeper":
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 3 function 0 config 1 on pccard0
wi0: 802.11 address: 00:02:2d:09:71:2b
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.6.1)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::202:2dff:fe09:712b%wi0 prefixlen 64 scopeid 0x3
inet 192.168.4.201 netmask 0xffffff00 broadcast 192.168.4.255
ether 00:02:2d:09:71:2b
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid xcllnt.net 1:xcllnt.net
stationname "FreeBSD WaveLAN/IEEE node"
channel 4 authmode OPEN powersavemode OFF powersavesleep 100
wepmode MIXED weptxkey 1
wepkey 1:128-bit
I'll test my Prism card in a sec...
--
Marcel Moolenaar USPA: A-39004 [email protected]
To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message