Re: CD/CD-RW drive not working on Dell Inspiron 7500
Brian T.Schellenberger <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Thursday 18 April 2002 12:04 pm, Paul Schenkeveld wrote: | On Thu, Apr 18, 2002 at 11:52:01AM -0400, Brian T.Schellenberger wrote: | > FWIW, I used to have a Dell i7500 with a CD-RW, and it worked just fine. | > | > You can get some of these messages if the media is bad or the speed is | > too high, though. Only some brands of CD-R and CD-RW would ever work | > properly for me; you might want to try getting few samples of different | > brands and see what happens. | | But the errors also appear with "burncd msinfo" and I never see the | drive light come up, burncd returns the error message immediately. Oh, yeah. You said that earlier in the thread. Unfortunately, my i7500 was stolen so I don't have it anymore for direct comparison. I have an i8000 with a CD-RW/DVD, though. I do have options ATA_STATIC_ID #Static device numbering Not sure why, but it's the only ata'ish thing that's any differennt from yours. | | > On Thursday 18 April 2002 11:18 am, Paul Schenkeveld wrote: | > | On Thu, Apr 18, 2002 at 07:32:49AM -0700, rob wrote: | > | > Paul Schenkeveld wrote: | > | > > Hi Nick, FreeBSD community, | > | > > | > | > > I just got a Dell Inspiron showing the same error messages under | > | > > FreeBSD 4.5 pl3. Since I saw no followup with a solution I was | > | > > wondering whether you got the CD/RW to work (ie. to write writable | > | > > and rewritable media). | > | > > | > | > > I can mount and read CDs and a CDRW written on a Yamaha SCSI burner | > | > > but 'burncd msinfo' and 'burncd blank' already give errors. From | > | > > my kernel config: | > | > > | > | > > device ata0 at isa? port IO_WD1 irq 14 | > | > > device ata1 at isa? port IO_WD2 irq 15 | > | > > device ata | > | > > device atadisk # ATA disk drives | > | > > device atapicd # ATAPI CDROM drives | > | > > #evice atapifd # ATAPI floppy drives | > | > > #evice atapist # ATAPI tape drives | > | > > | > | > > >From /var/log/messages: | > | > > | > | > > Apr 18 11:35:41 i4100 /kernel: acd0: CD-RW <HL-DT-ST CD-RW | > | > > GCE-8080N> at ata1-master using PIO4 Apr 18 13:30:37 i4100 /kernel: | > | > > acd0: READ_BIG - MEDIUM ERROR asc=02 ascq=00 error=00 Apr 18 | > | > > 13:31:34 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST | > | > > asc=24 ascq=00 error=00 Apr 18 13:31:44 i4100 /kernel: acd0: | > | > > READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00 Apr 18 | > | > > 13:33:43 i4100 /kernel: acd0: BLANK_CMD - ILLEGAL REQUEST asc=64 | > | > > ascq=00 error=00 | > | > > | > | > > Bye, | > | > > | > | > > Paul Schenkeveld | > | > > | > | > > On Wed, Oct 17, 2001 at 03:17:22PM -0700, Nick Tonkin wrote: | > | > > > Hello FreeBSD folks, | > | > > > | > | > > > I cannot get the CD-CD/RW drive to work under FreeBSD 4.4 on my | > | > > > Dell inspiron 7500. I know this has been brought up before but I | > | > > > could not find a solution. | > | > > > | > | > > > The CD drive is made by Matsushita I think, product number is | > | > > > UJDA310L | > | > > > | > | > > > Note that the behavior is different depending on whether or not | > | > > > there is a disk in tghe drive at boot. When I start the machine | > | > > > with a disk in it I get this: | > | > > > | > | > > > root@bomba ~>dmesg | grep -n acd0 | > | > > > 78:acd0: CDROM <UJDA310 Program Loader> at ata1-master using PIO2 | > | > > > 86:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 87:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 88:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 89:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 90:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > | > | > > > ... and then: | > | > > > | > | > > > root@bomba ~>mount /cdrom | > | > > > cd9660: /dev/acd0c: Input/output error | > | > > > | > | > > > ... whereas if I start the machine without a disk in it, I get: | > | > > > | > | > > > root@bomba ~>grep -n acd0 ~nick/foo | > | > > > 78:acd0: CD-RW <UJDA310> at ata1-master using PIO4 | > | > > > 167:acd0: CD-RW <UJDA310> a4 ata1-master using PIO4 | > | > > > 256:acd0: CD-RW <UJDA310> at ata1-master using PIO4 | > | > > > 351:acd0: CD-RW <UJDA310> at ata1-master using PIO4 | > | > > > 358:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 359:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 360:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > 361:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 | > | > > > | > | > > > ... and then I can open the drive OK, insert a disk, close the | > | > > > drive manually (the drawer is not drawn in by the motor as with | > | > > > other CD-ROM drives I have used, or as with this one under | > | > > > windoze), and then I get: | > | > > > | > | > > > root@bomba ~>mount /cdrom | > | > > > cd9660: /dev/acd0c: Input/output error | > | > > > ... followed by the same series of errors. | > | > > > | > | > > > Any help greatly appreciated. | > | > > > | > | > > > root@bomba ~>uname -a | > | > > > FreeBSD bomba.rlnt.net 4.4-RELEASE FreeBSD 4.4-RELEASE #0: Wed | > | > > > Oct 17 12:59:32 | > | > > > PDT 2001 [email protected]:/usr/src/sys/compile/WITHSOUND | > | > > > i386 | > | > > > | > | > > > | > | > > > ~~~~~~~~~~~ | > | > > > Nick Tonkin | > | > > > | > | > > > | > | > > > To Unsubscribe: send mail to [email protected] | > | > > > with "unsubscribe freebsd-mobile" in the body of the message | > | > > | > | > > To Unsubscribe: send mail to [email protected] | > | > > with "unsubscribe freebsd-mobile" in the body of the message | > | > | > | > I don't know if this will help you, but I have sometimes gotten | > | > similar errors, and ejecting and re-inserting the media allowed me to | > | > use burncd. Rob. | > | | > | Ok, I tried about 10 times but the results are the same. I tried | > | mounting the CD on several occasions between re-inserting the media and | > | was able to mount it every time. Of course I allowed for at least 30 | > | secs to settle down between removals, re-inserts, mounts and burncds. | > | | > | Doesn't the "ILLEGAL REQUEST" mean that a certain command is not | > | understood by the hardware at all? | > | | > | Paul Schenkeveld | > | | > | To Unsubscribe: send mail to [email protected] | > | with "unsubscribe freebsd-mobile" in the body of the message | > | > -- | > Brian T. Schellenberger . . . . . . . [email protected] (work) | > Brian, the man from Babble-On . . . . [email protected] (personal) | > ME --> http://www.babbleon.org | > http://www.eff.org <-- GOOD GUYS --> | > http://www.programming-freedom.org -- Brian T. Schellenberger . . . . . . . [email protected] (work) Brian, the man from Babble-On . . . . [email protected] (personal) ME --> http://www.babbleon.org http://www.eff.org <-- GOOD GUYS --> http://www.programming-freedom.org To Unsubscribe: send mail to [email protected] with "unsubscribe freebsd-mobile" in the body of the message