Re: Bluetooth on IBM T30 (USB device problem)
Larry Rosenman <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
--On Tuesday, March 25, 2003 13:25:47 -0800 Maksim Yevmenkin <[email protected]> wrote: > Tobias, > >>> yes it is a CSR chip based device. can you tell if its a USB device? >> >> yes, it is usb. windows clearly states it as usb. > > good. then you will most likely get it to work. if you > get it to attach (see below). > >>> 1) at loader prompt type (without quotes) "boot -v" >>> 2) do not press the Bluetooth button just yet >>> 3) wait until system is fully loaded >>> 4) kldload ugen (this is only required if you do not have >>> "device ugen" the in the kernel config file) >>> 5) press the Bluetooth button >> >> did 1), then 5) >> >> ugen did not attach, instead I got an error. see the attached >> files, the error is at the bottom of dmesg. > > Mar 25 21:59:36 angel5 kernel: uhub2: device problem, disabling port 1 I had a similar (USB) issue on my Fujitsu Laptop, until I **ENABLED** the USB Floppy option in my BIOS. Don't ask me why that fixed it, but ANY USB device I plugged in would garner the above response without that option being set. Just another data point. (BTW, 4-STABLE, if it matters). -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [email protected] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 To Unsubscribe: send mail to [email protected] with "unsubscribe freebsd-mobile" in the body of the message