Re: Bluetooth stack for FreeBSD ( test bcmfw )
miniyan <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hello Maksim, As we discussed on [email protected] which is Planex GW-BH02U does not work on bluetooth stack. This product uses Broadcom BCM2033 module and you reached to solution, firmware patch for the module. I should report you when I tested bcmfw command. I've been installed 2003-04-07(patched) on Casio FIVA. At first, I tried to connect HSC HNT-UB01(MITSUMI Module). Bluetooth stack looks fine. Next, I tried to connect GW-BH02U. This module found with ubt0. Of course hccommand still problem. So, I should type following command on firm dir. # bcmfw -n ubt0 -m BCM2033-MD.hex -f BCM2033-FW.bin bcmfw[498]: Could not NgSendMsg(4, ubt0:, 1021837971, 7, 0xbfbffb6e, 2). No such file or directory (2) Unfortunately, I got following message on console and upgrade failure. Allocationg major#249 to "ubt" ubt0: at uhub0 port 1 (addr 2) disconnected ubt0: detached ugen0: Broadcom Corp. BCM2033, rev 1.01/0.a0, addr2 I tried to solve with use gdb and trace bcmfw. So, bcmfw called bcmfw_device_nodes twice. First one should passed. Second one show that syslog message to failure. I don't know why but when firmware transfered to module, just after ubt0 become detached. I should test continuously, If this report becomes help you for fix problem. Thanks. takahiko ------------------------------------------------------------------- I'm translating Pav's bluetooth.html to Japanese(still translating). http://www.surfline.ne.jp/kaneko/papa_sakura/FreeBSD/bluetooth.html ------------------------------------------------------------------- miniyan <[email protected]> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"