USB issues with Aladdin M5237 -- debug output

"Cliff L. Biffle" <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <200304170050.14051.cbiffle__29480.3309640431$1050565829@safety.net> 
Okay, I've upped the OHCI and USB debug levels.  This is the output I receive 
when I plug a device in.  If anyone who's more familiar with the system than 
I could take a look at it, I'd be greatly indebted.

-Cliff L. Biffle

ohci_intr1: enter
ohci_intr: sc=0xc1bd0000 intrs=0x40(0x40) eintrs=0x40
ohci_rhsc: sc=0xc1bd0000 xfer=0xc0c64e00 hstatus=0x00000000
ohci_rhsc: change=0x02
usb_transfer_complete: pipe=0xc0c64a80 xfer=0xc0c64e00 status=0 actlen=1
usb_transfer_complete: repeat=1 new head=0xc0c64e00
usb_needs_explore
ohci_rhsc_able: on=0
usb_event_thread: woke up
usb_discover
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=1
ohci_root_ctrl_transfer: port status=0x10100
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0x23 request=01
ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=16
ohci_rhsc_able: on=1
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=0
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=2
ohci_root_ctrl_transfer: port status=0x0100
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
ohci_intr1: enter
ohci_intr: sc=0xc1bd0000 intrs=0x40(0x40) eintrs=0x40
ohci_rhsc: sc=0xc1bd0000 xfer=0xc0c64e00 hstatus=0x00000000
ohci_rhsc: change=0x02
usb_transfer_complete: pipe=0xc0c64a80 xfer=0xc0c64e00 status=0 actlen=1
usb_transfer_complete: repeat=1 new head=0xc0c64e00
usb_needs_explore
ohci_rhsc_able: on=0
usb_event_thread: woke up
usb_discover
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=1
ohci_root_ctrl_transfer: port status=0x10101
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0x23 request=01
ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=16
ohci_rhsc_able: on=1
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=0
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0x23 request=03
ohci_root_ctrl_transfer: reset port 1
ohci_intr1: enter
ohci_intr: sc=0xc1bd0000 intrs=0x40(0x40) eintrs=0x40
ohci_rhsc: sc=0xc1bd0000 xfer=0xc0c64e00 hstatus=0x00000000
ohci_rhsc: change=0x02
usb_transfer_complete: pipe=0xc0c64a80 xfer=0xc0c64e00 status=0 actlen=1
usb_transfer_complete: repeat=1 new head=0xc0c64e00
usb_needs_explore
ohci_rhsc_able: on=0
ohci port 1 reset, status = 0x100103
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=0
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_reset_port: port 1 reset done, error=NORMAL_COMPLETION
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=1
ohci_root_ctrl_transfer: port status=0x100103
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0x23 request=01
ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=20
ohci_rhsc_able: on=1
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=0
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=1
ohci_root_ctrl_transfer: port status=0x0103
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_new_device bus=0xc1bd0000 port=1 depth=1 speed=2
usbd_setup_pipe: dev=0xc1ffb480 iface=0 ep=0xc1ffb4a4 pipe=0xc1ffb484
ohci_open: pipe=0xc2041c80, addr=0, endpt=0 (1)
ohci_alloc_std: allocating chunk
ohci_add_ed: sed=0xc1bd17a0 head=0xc1bd1fe0
usbd_get_desc: type=1, index=0, len=8
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc2041c80, running=0
usbd_dump_queue: pipe=0xc2041c80
usb_insert_transfer: pipe=0xc2041c80 running=0 timeout=5000
ohci_device_control type=0x80, request=0x06, wValue=0x0100, wIndex=0x0000 
len=8, addr=0, endpt=0
ohci_device_request:
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=80000
tailp=0x006e47d0 headflags=6e47d0 headp=0x006e47d0 nexted=0x00000000
TD(0xc1bf07d0) at 006e47d0: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e4740 be=0x0065dca7
TD(0xc1bf0740) at 006e4740: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dcc0 nexttd=0x006e47a0 be=0x0065dcc7
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e4770 be=0x00000000
TD(0xc1bf0770) at 006e4770: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_device_request: status=2
ohci_dumpregs: rev=0x00000110 control=0x000000bf command=0x00000002
               intrstat=0x00000000 intre=0x8000004b intrd=0x8000004b
               hcca=0x0002d700 percur=0x00000000 ctrlhd=0x006c5fe0
               ctrlcur=0x00000000 bulkhd=0x006c5fc0 bulkcur=0x00000000
               done=0x00000000 fmival=0xa7782edf fmrem=0x800000ca
               fmnum=0x0000c599 perst=0x00002a2f lsthrs=0x00000628
               desca=0x01000002 descb=0x00000000 stat=0x00000000
               port1=0x00000103 port2=0x00000100
         HCCA: frame_number=0x0000 done_head=0x00000000
ctrl head:
ED(0xc1bd1fe0) at 0x006c5fe0: addr=0 endpt=0 maxp=0 flags=4000<SKIP>
tailp=0x00000000 headflags=0 headp=0x00000000 nexted=0x006c57a0
sed:
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=80000
tailp=0x006e4770 headflags=6e47d0 headp=0x006e47d0 nexted=0x00000000
TD(0xc1bf07d0) at 006e47d0: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e4740 be=0x0065dca7
TD(0xc1bf0740) at 006e4740: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dcc0 nexttd=0x006e47a0 be=0x0065dcc7
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e4770 be=0x00000000
TD(0xc1bf0770) at 006e4770: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_rhsc_able: on=1
ohci_timeout: oxfer=0xc0c64a00
usb_add_task: task=0xc0c64a64
usb_task_thread: woke up task=0xc0c64a64
ohci_timeout_task: xfer=0xc0c64a00
ohci_abort_xfer: xfer=0xc0c64a00 pipe=0xc2041c80 sed=0xc1bd17a0
ohci_abort_xfer: stop ed=0xc1bd17a0
usb_schedsoftintr: polling=0
ohci_softintr: enter
:ohci_softintr: sdone=0 sidone=0
ohci_process_done: TD done:
ohci_softintr: ITD done:
ohci_softintr: done:
ohci_abort_xfer: sed=
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=84000<SKIP>
tailp=0x006e4770 headflags=6e47d0 headp=0x006e47d0 nexted=0x00000000
TD(0xc1bf07d0) at 006e47d0: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e4740 be=0x0065dca7
TD(0xc1bf0740) at 006e4740: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dcc0 nexttd=0x006e47a0 be=0x0065dcc7
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e4770 be=0x00000000
TD(0xc1bf0770) at 006e4770: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_abort_xfer: set hd=0x086e4770, tl=0x006e4770
usb_transfer_complete: pipe=0xc2041c80 xfer=0xc0c64a00 status=15 actlen=0
usb_transfer_complete: repeat=0 new head=0
ohci_ctrl_done: xfer=0xc0c64a00
usbd_start_next: pipe=0xc2041c80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_get_desc: type=1, index=0, len=8
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc2041c80, running=0
usbd_dump_queue: pipe=0xc2041c80
usb_insert_transfer: pipe=0xc2041c80 running=0 timeout=5000
ohci_device_control type=0x80, request=0x06, wValue=0x0100, wIndex=0x0000 
len=8, addr=0, endpt=0
ohci_device_request:
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=80000
tailp=0x006e4770 headflags=6e4770 headp=0x006e4770 nexted=0x00000000
TD(0xc1bf0770) at 006e4770: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e47d0 be=0x0065dca7
TD(0xc1bf07d0) at 006e47d0: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dd70 nexttd=0x006e47a0 be=0x0065dd77
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e4740 be=0x00000000
TD(0xc1bf0740) at 006e4740: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_device_request: status=2
ohci_dumpregs: rev=0x00000110 control=0x000000bf command=0x00000002
               intrstat=0x00000000 intre=0x8000004b intrd=0x8000004b
               hcca=0x0002d700 percur=0x00000000 ctrlhd=0x006c5fe0
               ctrlcur=0x00000000 bulkhd=0x006c5fc0 bulkcur=0x00000000
               done=0x00000000 fmival=0xa7782edf fmrem=0x80002694
               fmnum=0x0000da16 perst=0x00002a2f lsthrs=0x00000628
               desca=0x01000002 descb=0x00000000 stat=0x00000000
               port1=0x00000103 port2=0x00000100
         HCCA: frame_number=0x0000 done_head=0x00000000
ctrl head:
ED(0xc1bd1fe0) at 0x006c5fe0: addr=0 endpt=0 maxp=0 flags=4000<SKIP>
tailp=0x00000000 headflags=0 headp=0x00000000 nexted=0x006c57a0
sed:
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=80000
tailp=0x006e4740 headflags=6e4770 headp=0x006e4770 nexted=0x00000000
TD(0xc1bf0770) at 006e4770: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e47d0 be=0x0065dca7
TD(0xc1bf07d0) at 006e47d0: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dd70 nexttd=0x006e47a0 be=0x0065dd77
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e4740 be=0x00000000
TD(0xc1bf0740) at 006e4740: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_timeout: oxfer=0xc0c64a00
usb_add_task: task=0xc0c64a64
usb_task_thread: woke up task=0xc0c64a64
ohci_timeout_task: xfer=0xc0c64a00
ohci_abort_xfer: xfer=0xc0c64a00 pipe=0xc2041c80 sed=0xc1bd17a0
ohci_abort_xfer: stop ed=0xc1bd17a0
usb_schedsoftintr: polling=0
ohci_softintr: enter
:ohci_softintr: sdone=0 sidone=0
ohci_process_done: TD done:
ohci_softintr: ITD done:
ohci_softintr: done:
ohci_abort_xfer: sed=
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=84000<SKIP>
tailp=0x006e4740 headflags=6e4770 headp=0x006e4770 nexted=0x00000000
TD(0xc1bf0770) at 006e4770: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e47d0 be=0x0065dca7
TD(0xc1bf07d0) at 006e47d0: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dd70 nexttd=0x006e47a0 be=0x0065dd77
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e4740 be=0x00000000
TD(0xc1bf0740) at 006e4740: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_abort_xfer: set hd=0x086e4740, tl=0x006e4740
usb_transfer_complete: pipe=0xc2041c80 xfer=0xc0c64a00 status=15 actlen=0
usb_transfer_complete: repeat=0 new head=0
ohci_ctrl_done: xfer=0xc0c64a00
usbd_start_next: pipe=0xc2041c80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_get_desc: type=1, index=0, len=8
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc2041c80, running=0
usbd_dump_queue: pipe=0xc2041c80
usb_insert_transfer: pipe=0xc2041c80 running=0 timeout=5000
ohci_device_control type=0x80, request=0x06, wValue=0x0100, wIndex=0x0000 
len=8, addr=0, endpt=0
ohci_device_request:
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=80000
tailp=0x006e4740 headflags=6e4740 headp=0x006e4740 nexted=0x00000000
TD(0xc1bf0740) at 006e4740: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e4770 be=0x0065dca7
TD(0xc1bf0770) at 006e4770: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dd90 nexttd=0x006e47a0 be=0x0065dd97
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e47d0 be=0x00000000
TD(0xc1bf07d0) at 006e47d0: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_device_request: status=2
ohci_dumpregs: rev=0x00000110 control=0x000000bf command=0x00000002
               intrstat=0x00000000 intre=0x8000004b intrd=0x8000004b
               hcca=0x0002d700 percur=0x00000000 ctrlhd=0x006c5fe0
               ctrlcur=0x00000000 bulkhd=0x006c5fc0 bulkcur=0x00000000
               done=0x00000000 fmival=0xa7782edf fmrem=0x8000041e
               fmnum=0x0000ee8f perst=0x00002a2f lsthrs=0x00000628
               desca=0x01000002 descb=0x00000000 stat=0x00000000
               port1=0x00000103 port2=0x00000100
         HCCA: frame_number=0x0000 done_head=0x00000000
ctrl head:
ED(0xc1bd1fe0) at 0x006c5fe0: addr=0 endpt=0 maxp=0 flags=4000<SKIP>
tailp=0x00000000 headflags=0 headp=0x00000000 nexted=0x006c57a0
sed:
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=80000
tailp=0x006e47d0 headflags=6e4740 headp=0x006e4740 nexted=0x00000000
TD(0xc1bf0740) at 006e4740: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e4770 be=0x0065dca7
TD(0xc1bf0770) at 006e4770: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dd90 nexttd=0x006e47a0 be=0x0065dd97
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e47d0 be=0x00000000
TD(0xc1bf07d0) at 006e47d0: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_timeout: oxfer=0xc0c64a00
usb_add_task: task=0xc0c64a64
usb_task_thread: woke up task=0xc0c64a64
ohci_timeout_task: xfer=0xc0c64a00
ohci_abort_xfer: xfer=0xc0c64a00 pipe=0xc2041c80 sed=0xc1bd17a0
ohci_abort_xfer: stop ed=0xc1bd17a0
usb_schedsoftintr: polling=0
ohci_softintr: enter
:ohci_softintr: sdone=0 sidone=0
ohci_process_done: TD done:
ohci_softintr: ITD done:
ohci_softintr: done:
ohci_abort_xfer: sed=
ED(0xc1bd17a0) at 0x006c57a0: addr=0 endpt=0 maxp=8 flags=84000<SKIP>
tailp=0x006e47d0 headflags=6e4740 headp=0x006e4740 nexted=0x00000000
TD(0xc1bf0740) at 006e4740: f2e00000<SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dca0 nexttd=0x006e4770 be=0x0065dca7
TD(0xc1bf0770) at 006e4770: f3f00000<IN,TOG1,SETTOGGLE> delay=7 ec=0 cc=15
cbp=0x0065dd90 nexttd=0x006e47a0 be=0x0065dd97
TD(0xc1bf07a0) at 006e47a0: f3280000<OUT,TOG1,SETTOGGLE> delay=1 ec=0 cc=15
cbp=0x00000000 nexttd=0x006e47d0 be=0x00000000
TD(0xc1bf07d0) at 006e47d0: 0 delay=0 ec=0 cc=0
cbp=0x00000000 nexttd=0x00000000 be=0x00000000
ohci_abort_xfer: set hd=0x086e47d0, tl=0x006e47d0
usb_transfer_complete: pipe=0xc2041c80 xfer=0xc0c64a00 status=15 actlen=0
usb_transfer_complete: repeat=0 new head=0
ohci_ctrl_done: xfer=0xc0c64a00
usbd_start_next: pipe=0xc2041c80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_new_device: addr=2, getting first desc failed
usbd_remove_device: 0xc1ffb480
usbd_ar_pipe: pipe=0xc2041c80
usbd_dump_queue: pipe=0xc2041c80
ohci_device_ctrl_close: pipe=0xc2041c80
uhub_explore: usb_new_device failed, error=TIMEOUT
uhub0: device problem, disabling port 1
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0x23 request=01
ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=1
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=0
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=2
ohci_root_ctrl_transfer: port status=0x0100
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=1
ohci_root_ctrl_transfer: port status=0x0101
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00
usbd_alloc_xfer() = 0xc0c64a00
usbd_transfer: xfer=0xc0c64a00, flags=2, pipe=0xc0c64e80, running=0
usbd_dump_queue: pipe=0xc0c64e80
usb_insert_transfer: pipe=0xc0c64e80 running=0 timeout=5000
ohci_root_ctrl_control type=0xa3 request=00
ohci_root_ctrl_transfer: get port status i=2
ohci_root_ctrl_transfer: port status=0x0100
usb_transfer_complete: pipe=0xc0c64e80 xfer=0xc0c64a00 status=0 actlen=4
usb_transfer_complete: repeat=0 new head=0
usbd_start_next: pipe=0xc0c64e80, xfer=0
usbd_free_xfer: 0xc0c64a00

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.