Re: netgear ma311 failures (wi0 driver)
"vizion communication" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
OK guys thanks for all the help I have now successfully updated the MA311 to latest version. The PCI card is in the slot recognized as wi0. dmesg identifies the card-- I have made the entry in rc.conf ifconfig_wi0="DHCP" Does anyone know a good way of ensuring that wi0 only accepted communications from a specific access point (mac address and ssid)? David ----- Original Message ----- From: "Doug Barton" <[email protected]> To: "Mike Jackson" <[email protected]> Cc: <[email protected]> Sent: Monday, April 21, 2003 9:54 AM Subject: Re: netgear ma311 failures (wi0 driver) > On Mon, 21 Apr 2003, Mike Jackson wrote: > > > ext Doug Barton ([email protected]) wrote: > > > > > > What firware revision are your cards? If you're using less than 1.4.9 on > > > the 311, you're likely to have problems. I posted recently on upgrading > > > both my 401 and 311 to 1.5.6, and I'm not having any problems with the 311 > > > in a 4.8 box. Haven't had a chance to try -current on the server though. > > > > Hi, > > The ma401 has 1.03.06.00. I don't know what the ma311 has. Is there a > > way to determine this in a freebsd box? Or do I need to boot a dos boot > > disk or what? > > You should see something like this either in /var/run/dmesg.boot, or > possibly in /var/log/messages: > > wi0: Intersil Firmware: Primary 1.01.01, Station 1.05.06 > > HTH, > > Doug > > -- > > This .signature sanitized for your protection > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "[email protected]" > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"