Re: wi0 watchdog timeout

Alexander Leidinger <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]> 
On 20 Apr, M. Warner Losh wrote:

> : please keep me CCed, I'm not subscribed.
> : 
> : I've two Orinocco OEM PCMCIA cards (WaveLAN), one in my desktop system 
> : (-stable from Feb. 5). Now I wanted to test both with a friend, but he 
> : didn't even get's the signal strength display on his W2K laptop (at a 
> : distance of 1m this isn't something I expected). Then I found the "wi0: 
> : watchdog timeout" in the output of dmesg. I think this is the problem we 
> : have. So I searched for it with google and found some irq tips. But they 
> : didn't work for me:
> : 
> : (105) netchild@ttyp0 > sysctl -a | grep irq
> : hw.pcic.irq: 15
> 
> Sure you don't have a secondary IDE controller enabled in the BIOS on
> this machine?

It doesn't show up in the dmesg, and I think I've disabled it in the
bios. dmesg attached.

Bye,
Alexander.

-- 
      ...and that is how we know the Earth to be banana-shaped.

http://www.Leidinger.net                       Alexander @ Leidinger.net
  GPG fingerprint = C518 BC70 E67F 143F BE91  3365 79E2 9C60 B006 3FE7
dmesg.boot (text/plain, 7 KB) 
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #28: Fri Apr 19 13:29:18 CEST 2002
    [email protected]:/big/usr/src/sys/i386/compile/WORK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ce000.
Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc04ce0a8.
Preloaded elf module "/boot/kernel/msdosfs.ko" at 0xc04ce154.
Preloaded elf module "/boot/kernel/ntfs.ko" at 0xc04ce200.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc04ce2ac.
Preloaded elf module "/boot/kernel/pseudofs.ko" at 0xc04ce358.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc04ce408.
Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc04ce4b4.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04ce560.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc04ce60c.
Preloaded elf module "/boot/kernel/ng_ether.ko" at 0xc04ce6b8.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc04ce768.
Preloaded elf module "/boot/kernel/ng_pppoe.ko" at 0xc04ce818.
Preloaded elf module "/boot/kernel/ng_socket.ko" at 0xc04ce8c8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04ce978.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04cea24.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc04cead4.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc04ceb88.
Preloaded elf module "/boot/kernel/uhid.ko" at 0xc04cec30.
Preloaded elf module "/boot/kernel/ulpt.ko" at 0xc04cecdc.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04ced88.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc04cee30.
Preloaded elf module "/boot/kernel/accf_data.ko" at 0xc04ceed8.
Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc04cef88.
Preloaded elf module "/boot/kernel/random.ko" at 0xc04cf038.
Preloaded elf module "/boot/kernel/atspeaker.ko" at 0xc04cf0e4.
Preloaded elf module "/boot/kernel/joy.ko" at 0xc04cf194.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04cf23c.
link_elf: symbol card_compat_do_probe_desc undefined
KLD file joy.ko - could not finalize loading
Timecounter "i8254"  frequency 1193199 Hz
Timecounter "TSC"  frequency 801829510 Hz
CPU: AMD Duron(tm) Processor (801.83-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 268369920 (262080K bytes)
avail memory = 255676416 (249684K bytes)
Pentium Pro MTRR support enabled
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0317917 (1000117)
VESA: 3dfx Interactive, Inc.
Using $PIR table, 9 entries at 0xc00fdd00
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <BIOSTA AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Hewlett-Packard DeskJet 895C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device 7.4 on pci0
viapropm0: SMBus revision code 0x40
smb0: <SMBus generic I/O> on smbus0
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xdb000000-0xdb00007f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:b0:8d:ce
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7850 SCSI adapter> port 0xec00-0xecff mem 0xdb001000-0xdb001fff irq 11 at device 10.0 on pci0
aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs
atspeaker0 port 0x61 on acpi0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 895C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xcd000-0xcd7ff,0xcc000-0xcc7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x6 on isa0
sc0: VGA <16 virtual consoles, flags=0x206>
sio1: configured irq 10 not in bitmap of probed irqs 0
sio1: port may not be enabled
isic0 at port 0xb00-0xb1f,0x300-0x31f,0x1300-0x131f,0xee0-0xeff,0x6e0-0x6ff,0x16e0-0x16ff,0x1b00-0x1b1f irq 3 flags 0x4 on isa0
isic0: passive stack unit 0
isic0: AVM A1 or Fritz!Card Classic
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
i4b: ISDN call control device attached
i4btrc: 2 ISDN trace device(s) attached
i4bctl: ISDN system control port attached
i4brbch: 2 raw B channel access device(s) attached
i4bisppp: 2 ISDN SyncPPP device(s) attached
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master UDMA100
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata1-master PIO0
Waiting 6 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s2a
cd1 at ahc0 bus 0 target 2 lun 0
cd1: <PIONEER DVD-ROM DVD-305 1.00> Removable CD-ROM SCSI-2 device 
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.