Current, ACPI and my Compac EVO N800c

Hello!

Things are getting better as far as ACPI support in CURRENT and
my ol' Compaq NEVO800c concerns. Now the dmesg looks as follows:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon May  5 15:42:32 CEST 2003
    [email protected]:/usr/obj/usr/src/sys/POOH
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05aa000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc05aa1f4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc05aa2a0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05aa34c.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1794187564 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1794.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536674304 (511 MB)
avail memory = 515108864 (491 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CPQ004A > on motherboard
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz1: <thermal zone> on acpi0
acpi_tz2: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x3e8-0x3ef irq 3 drq 3 on acpi0
sio1: type 16550A
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> 
panic: Root mount failed, startup aborted.

So it gets a lot longer in the process. I don't know if anyone has any use
of this to make the ACPI work even better with Compaq laptops, but here
it is anyway.

I also got a mail from Bakul Shah who had made it work with some tweaked
Linux code that he loaded in /boot/loader.conf

But if that works (as he say it does) Then it should be integrated into
FreeBSD-CURRENT! Or?

-- 
Gunnar Flygt
OPC Data
Swedish Radio AB

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"