Re: Orinoco Gold trouble with SMP server
"M. Warner Losh" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
In message: <[email protected]> Tod McQuillin <[email protected]> writes: : pcic0: <Vadem 469> at port 0x3e2 iomem 0xd4000 irq 9 on isa0 : pcic0: management irq 9 Chances are excellent that this won't work. Polling mode seems best. : pccard0: <PC Card 16-bit bus (classic)> on pcic0 : pccard1: <PC Card 16-bit bus (classic)> on pcic0 : : but when pccardd sees the card, it can't set up the driver properly: : : wi0 at port 0x240-0x27f irq 10 slot 0 on pccard0 : wi0: wi_cmd: busy bit won't clear. : wi0: wi_cmd: busy bit won't clear. : wi0: init failed : wi0: wi_cmd: busy bit won't clear. : wi0: wi_cmd: busy bit won't clear. : wi0: mac read failed 5 : device_probe_and_attach: wi0 attach returned 5 Looks like irq 10 is in use. Pick anotehr one. : * Changed the definition of pcic0 in my kernel config file. I tried : both port 0x3e0 iomem 0xd0000 and port 0x3e2 iomem 0xd4000 (this requires : changing a jumper on the ISA card). I also tried irq's 9 and 10 as well as : polling mode. OK. I'd still say you need to find an IRQ that isn't in use. : * Changed settings in /etc/defaults/pccardd.conf. I tried irq's 9, 10 : and 12. 12 is bad because it is the mouse. : * Added hw.pcic.intr_path="1" and hw.pcic.init_routing="1" to : /boot/loader.conf in varying combinations. These won't change a thing for you. Warner _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"