Re: FreeBSD laptop with: 56k modem, ethernet, Xfree86

> Date: Tue, 10 Jun 2003 23:11:02 +0200
> From: Mark Santcroos <[email protected]>
> 
> On Tue, Jun 10, 2003 at 02:02:53PM -0700, Kevin Oberman wrote:
> > Turns out that the only unknown PCI device on my system is the modem.
> > Intel 82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller in class
> > "simple comms". 
> 
> Can you show pciconf -vl? (Only the piece with the audio stuff)
> 
> Mark
> 
> -- 
> Mark Santcroos                    RIPE Network Coordination Centre
> http://www.ripe.net/home/mark/    New Projects Group/TTM
> 

Sorry to be so late with this, but I somehow missed the message until I
saw Harald's comment. Here is the whole thing. Since the ICH3 does
most everything, the audio looks about the same as the network.

agp0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82845/E/MP/MZ Brookdale CPU to I/O Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82845/E/MP/MZ Brookdale CPU to AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:	class=0x0c0300 card=0x02201014 chip=0x24828086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x02201014 chip=0x24848086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x02201014 chip=0x24878086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #3'
    class    = serial bus
    subclass = USB
pcib2@pci0:30:0:	class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM (ICH2/3) PCI to I/O Hub Bridge (2448)'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CAM LPC Interface or ISA bridge: see Notes'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:	class=0x01018a card=0x02201014 chip=0x248a8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
ichsmb0@pci0:31:3:	class=0x0c0500 card=0x02201014 chip=0x24838086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcm0@pci0:31:5:	class=0x040100 card=0x05081014 chip=0x24858086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
none0@pci0:31:6:	class=0x070300 card=0x051a1014 chip=0x24868086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
    class    = simple comms
none1@pci1:0:0:	class=0x030000 card=0x05171014 chip=0x4c571002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies'
    device   = 'Radeon Mobility M7 LW'
    class    = display
    subclass = VGA
cbb0@pci2:0:0:	class=0x060700 card=0x05121014 chip=0xac55104c rev=0x01 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1520 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
cbb1@pci2:0:1:	class=0x060700 card=0x05121014 chip=0xac55104c rev=0x01 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1520 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
none2@pci2:2:0:	class=0x028000 card=0x25138086 chip=0x38731260 rev=0x01 hdr=0x00
    vendor   = 'Intersil Americas Inc (Was: Harris Semiconductor)'
    device   = 'PRISM 2.5 802.11b 11Mbps Wireless Controller'
    class    = network
fxp0@pci2:8:0:	class=0x020000 card=0x02091014 chip=0x10318086 rev=0x42 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection'
    class    = network
    subclass = ethernet
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [email protected]			Phone: +1 510 486-8634
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"