Re: Still no Xircom Realport in 5.1-REL?

Thanks! I switched to hw=.cbb.start_memory=0x20000000 (though any 
address around there that wasn't already spoken for seemed to work 
fine) and it started to probe until I got the lovely  "MII without any 
PHY" which I am currently searching for information on. I am testing 
the Intel Realport and it works great with the current settings. I 
could probably just keep the Intel card in there but something seems to 
be driving me to find out why the Xircom isn't working :)


On Thursday, June 12, 2003, at 01:50  AM, M. Warner Losh wrote:

> In message: <[email protected]>
>             Aron Roberts <[email protected]> writes:
> : So I have been periodically checking in with each minor
> : update/snap/beta/rc to 5.x to see if My Xircom RBE-100 will work. 
> Since
> : others seem to have the same card (plus modem) working it seems like
> : the plain ol' RBE-100 has a good shot at working. I have been doing
> : searches though mail archives.. and if there is some instruction I am
> : missing I am sorry but I don't know the magic incantation to make 
> this
> : sucker work. I know it's a good card because it works great under
> : NetBSD with no hassle.
> :
> : Hardware in question is a IBM Thinkpad 600X with a Xircom RealPort
> : RBE-100(ethernet only)
> : It's booting from the 5.1-RELEASE Disc 1 ISO
> :
> : I get fun stuff like:
> :
> : cardbus1: Bad header in rom0: [0] ffff
>
> This means that you are using a bad address for the CIS.  You'll need
> to set hw.cbb.start_memory to an address that works for your machine.
> You'll have to look at other devices on the same bus to see what the
> right adress to try is.  It should be something close, that doesn't
> cross a too many bit boundry that isn't used by another device on the
> bus.
>
> Warner

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"