Re: Problem with PCMCIA Ethernet card: no card in database for '(null)'...
"Ali Uezguemuer" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <000801c338ca$60f95c90$c166e2c3@jupiter> |
I've tried a few days to get the dmesg-output off that old laptop and I
finally succeeded. It's attached to this eMail.
>
> dmesg and look for other PCI devices on the same bus as the cbb
> device. You'll see something like:
>
> pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem
0xf8ffe000-0xf8ffffff irq 5 at device 3.0 on pci2
> cbb0: <TI4451 PCI-CardBus Bridge> at device 15.0 on pci2
> fwohci0: <Texas Instruments PCI4451> mem
0xf8ff8000-0xf8ffbfff,0xf8ffd800-0xf8ffdfff irq 10 at device 15.2 on pci2
>
I'm confused since I can't link any of those lines to the ones that appear
on my screen.
I really don't want to annoy you guys, but I'm not familiar with hardware
issues at all. Can you help me?
Thank you in advance,
Ali
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
dmesg.txt
(text/plain, 2.4 KB)
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003
[email protected]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (150.85-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 16777216 (16384K bytes)
avail memory = 11304960 (11040K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI to ISA bridge (vendor=1045 device=c558)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Cirrus Logic GD7548 SVGA controller> at 2.0
atapci0: <Generic PCI ATA controller> port 0x1000-0x100f at device 20.0 on pci0
atapci0: Busmastering DMA not supported
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Cirrus logic 6722> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 2067MB <FUJITSU MHA2021AT> [4200/16/63] at ata0-master BIOSPIO
acd0: CDROM <COMPAQ CRD-S311> at ata0-slave BIOSPIO
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 1
pccard: card inserted, slot 1