Re: ESS Allergro ES1988 problems on 5.1R

"Sergey A. Osokin" <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
On Sun, Jun 29, 2003 at 02:30:05AM -0000, [email protected] wrote:
> Hi, i got this laptop HP Pavilion n5470, and ESS Allegro ES1988 sound card,
> also i've installed FreeBSD 5.1RELEASE. I added theese lines into my
> /boot/loader.conf <snd_maestro3_load="YES">, and after this i can here sound
> just from cd when doing "cdcontrol -f /dev/acd0 play 1, but i cannot play
> any other files, and when i try to do "mpg123 xxx.mp3, i can see this error
> in my /var/log/messages :
> pcm0: play:0: play interrupt timeout, channel dead
> 
> Heres my dmesg log www.muaythai.lt/dmesg.txt
> This is what i get from grep pcm /var/run/dmesg.boot:
> Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06b02a8.
> pcm0: <ESS Technology Allegro-1> port 0x1400-0x14ff at device 8.0 on pci0
> pcm0: failed to enable memory mapping!
> pcm0: <ESS Technology ES1988 AC97 Codec>
> 
> And this is what i get when cat /dev/sndstat:
> 
> FreeBSD Audio driver (new pcm)
> Installed devices:
> pcm0: <ESS Technology Allegro-1> at io 0x1400 irq 5 (4p/1r/0v channels
> duplex default
> 
> What you offer to do for me to solve this problem ?

Add following options into your /boot/loader.conf
(or /boot/loader.conf.local)

boot_verbose="YES"
hw.pci.allow_unsupported_io_range="1"

reboot your box and see if it helps you.
So if not, please provide more information about your
pcm driver status with the next command
$ dmesg | grep ^pcm

-- 

Rgdz,                        /"\  ASCII RIBBON CAMPAIGN
Sergey Osokin aka oZZ,       \ /    AGAINST HTML MAIL
http://ozz.pp.ru/             X          AND NEWS
                             / \
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.