Re: MCT USB<->RS232 driver

Bill Paul wrote:
>>In message: <[email protected]>
>>            [email protected] (Bill Paul) writes:
>>: When I got it home, I found that almost everything is supported in
>>: FreeBSD 5.x, except for one thing: the serial port. The chip is a
>>: MCT USB-232 device, which is supported in NetBSD, but not FreeBSD.
>>
>>But Scott Long already committed his umct driver a few days ago... :-)
>>
>>Warner
>>
> 
> 
> Yes, so I have been told. :P
> 
> And guess what. It has a bug. :)
> 
> Well ok, to be fair, it doesn't really have a bug: it lacks a workaround
> for a buggy chip. The driver determines the bulk output buffer size
> by checking the data returned by the chip in its bulk out endpoint
> descriptor. This is right in most cases, but not for the
> USB_PRODUCT_MCT_SITECOM_USB232 device (which, unfortunately, is what
> they put in the port replicator I bought). The value it returns for
> wMaxPacketSize is 32, but in reality, you must use 16. If you don't,
> the chip drops data under certain circumstances. A good example: attach
> a modem to the serial adapter and set up a PPP link over it, then try
> to ssh to a remote host somewhere. Ssh will get about halfway through
> the connection attempt and then hang. I observed a similar problem
> with my IRC client.
> 
> It turns out the NetBSD driver that I hacked up worked because it has
> a workaround for this chip bug. I applied a similar workaround to Scott's
> driver and now PPP works again. Here's a patch:
> 
> --- umct.c.orig	Thu Jul  3 18:50:39 2003
> +++ umct.c	Mon Jul  7 00:52:55 2003
> @@ -241,7 +241,10 @@
>  
>  		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT) {
>  			ucom->sc_bulkout_no = ed->bEndpointAddress;
> -			ucom->sc_obufsize = UGETW(ed->wMaxPacketSize);
> +			if (uaa->product == USB_PRODUCT_MCT_SITECOM_USB232)
> +				ucom->sc_obufsize = 16; /* device is broken */
> +			else
> +				ucom->sc_obufsize = UGETW(ed->wMaxPacketSize);
>  			continue;
>  		}
> 
> This is almost literally what NetBSD does. Barring any objections, I'd
> like to check this in. (CC'ing Scott on this e-mail.)
> 

Bill,

Excellent, feel free to commit this.  I remember seeing this workaround,
but since I didn't have the device that it applied to I must have
dropped the code by accident.

Scott

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"