Re: BCM4401 Support for FreeBSD
"Duncan Barclay" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.hackers,gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <002601c355ae$100a3240$a7ac77c1@DJK1Comp> |
Hello Terry, From: "Terry Lambert" <[email protected]> > Joe Marcus Clarke wrote: > > On Mon, 2003-07-28 at 12:18, Aeefyu wrote: > > > i.e. Broadcom 440x NIC support for FreeBSD 4.x and 5.x (as found on > > > latest Dell's Notebooks - mine is a 8500) > > > > > > Would anyone be so kind to enlighten me on the the current status? > > > Last I heard of developments being made was end of June. > > > > This was forwarded to me from Greg Lehey. The dcm driver works okay for > > me, but I had to hack it for some new bus dma changes. I have noticed a > > few issues of slowness with it when using it in a more "normal" sense > > (i.e. using it to read mail, ssh to machines, etc.). > > > Most likely, the interactive performance is a result of the RX > packet coelescing, with a timer set to too long an interval. In > general, it's probably an easy adjustment to make. It shouldn't be as I set the RX coalescing timer at the same settings as the Linux drivers - and it is set to 1 packet. > I notice that he also says he didn't know what to add into some > of the timer and media routines, so that could be part of the > issue as well (e.g. if it's getting wedged and having to unwedge > itself). Nope - no wedging is going on. It's packet aligment issues - either I'm programming the RX DMA pointers wrong or not adjusting them correctly on receipt. TX is absolutly fine, it can easily max out a 100MB/s link with hardly any CPU load. > BTW: As a rule of thumb, if you don't know what to put in a timer > or media routine, put a printf() there. It will likely annoy > someone into fixing it. 8-). Ta - will do when the RX issues are fixed. > -- Terry > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > To unsubscribe, send any mail to "[email protected]" > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[email protected]"