Re: New Laptop: i810: HELP
Norbert Augenstein <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Tue, 30 Apr 2002 05:31:40 -0500 Larry Rosenman <[email protected]> wrote: > * Larry Rosenman <[email protected]> [020429 21:29]: > > * Eric Anholt <[email protected]> [020429 19:54]: > > > On Mon, 2002-04-29 at 13:27, Larry Rosenman wrote: > > > > Well with that patch, we still get the same thing, but I suspect Eric > > > > did more than I did with the chips. > > > > > > > > Eric, > > > > I have the I830MG chipset in this laptop, and am willing to > > > > experiment and get it working on -STABLE. > > > > > > > > I currently get a X86 Illegal opcode right after the Gamma Correction > > > > message in the logs (same as before applying your agp_i810.[ch] patch. > > > > > > > > This is on a Fujitsu Lifebook C6651. > > > > > > Okay, I poked around in this, and I have to say that where it's going > > > wrong is totally out of my area of knowledge. As far as I can tell, > > > it's dying because the bios memory seems to be corrupted, or at least > > > it's more than the emulator can handle according to Stuart Barkley. > > > This is strange because Linux users have had it working. > > > > > > Just to make see if this is an interaction with AGP (since the agp code > > > has not been successfully used yet that I know of), could you try > > > removing AGP from your kernel or not modloading it at boot and see how X > > > works? It looks like X should handle not having AGP loaded, since you > > > have 8MB stolen for the card already. If it does work, you'll be > > > limited in resolution, but not as badly as those who only have 512k or > > > 1MB stolen. > > Playing with it, I can get a 320x200 X up in VGA mode, if I don't > > allow int10 to run. As soon as we bring int10 in, we get the checksum > > (I suspect we have a mapping issue somewhere). > > > > Is there anything I can run to map the BIOS ROMS on the machine? > > > > What can I do to help? > > > > I'd LOVE to get it running, but I suspect the BIOS mapping into the > > system is the issue, and I don't know what the maps are. > > > > With the following XF86Config, we get the attached log, and a 320x200 > screen using XFree86 -xf86config XF86Config.ler > > using startx with the same file in /etc/X11/XF86Config, we get a hang. > > Any ideas on how to verify what the BIOS really has? There are **NO** > tweaks available in the BIOS setup of the laptop (ACPI Compliant, and > normally runs Windows XP Home). > > hi, it seems there is something missing in your config-file i write some comment to the sections you have two Monitor/screen sections, normally ther is no need exept you have a dual-head graphic card. auge > > > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > Screen 1 "Screen1" RightOf "Screen0" #do you have a second monitor ?? > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > > Section "Module" > #Load "dbe" > #Load "dri" > #SubSection "extmod" > # option "omit xfree86-dga" > # option "omit xfree86-vidmodeextension" > # option "omit xfree86-misc" > # option "omit sync" > # option "omit xvideo" > # option "omit xvideo-motioncompensation" > # option "omit tog-cup" > #EndSubSection > #Load "glx" > #Load "pex5" > #Load "record" > #Load "xie" > #Load "xtrap" > #Load "speedo" #load speedo and type1 and you should not get the 2 font warnings > #Load "type1" # > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" # missing! Options "XkbRules" "xfree86" # Options "XkbModel" "pc105" # Options "XkbLayout" "de" #edit this for your needs!! just an example > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "SysMouse" #try "auto" instead of "sysmouse" > Option "Device" "/dev/sysmouse" # set i.e /dev/psm0 see your 'dmesg' > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" #missing! HorizSync ab.c - yx.z # VertRefresh de.f - ef.g #edit this!! > EndSection > > Section "Monitor" #second Monitor??? > Identifier "Monitor1" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "SWcursor" # [<bool>] > #Option "ColorKey" # <i> > #Option "CacheLines" # <i> > #Option "Dac6Bit" # [<bool>] > #Option "DRI" # [<bool>] > #Option "NoDDC" "True" # [<bool>] > #Option "XvMCSurfaces" # <i> > Identifier "Card0" > Driver "vga" > VideoRam 8192 > #option "novbe" > VendorName "Intel" > BoardName "i830M" > BusID "PCI:0:2:0" > EndSection > > Section "Device" # second Monitor > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "SWcursor" # [<bool>] > #Option "ColorKey" # <i> > #Option "CacheLines" # <i> > #Option "Dac6Bit" # [<bool>] > #Option "DRI" # [<bool>] > #Option "NoDDC" "True" # [<bool>] > #Option "XvMCSurfaces" # <i> > Identifier "Card1" > Driver "vga" > #option "novbe" > VendorName "Intel" > BoardName "i830M" > BusID "PCI:0:2:1" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 8 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" "640x480" #only this will be used > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > EndSection > > Section "Screen" # > Identifier "Screen1" #do you really need a second screen entry??? > Device "Card1" > Monitor "Monitor1" > DefaultDepth 8 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubSection > EndSection > > > XFree86 Version 4.2.0 / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 18 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: FreeBSD 4.5 i386 [ELF] > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 30 05:25:25 2002 > (++) Using config file: "XF86Config.ler" > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Screen "Screen1" (1) > (**) | |-->Monitor "Monitor1" > (**) | |-->Device "Card1" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,3575 card 10cf,113b rev 04 class 06,00,00 hdr 00 > (II) PCI: 00:02:0: chip 8086,3577 card 10cf,113c rev 04 class 03,00,00 hdr 80 > (II) PCI: 00:02:1: chip 8086,3577 card 10cf,113c rev 00 class 03,80,00 hdr 80 > (II) PCI: 00:1d:0: chip 8086,2482 card 10cf,113d rev 02 class 0c,03,00 hdr 80 > (II) PCI: 00:1d:1: chip 8086,2484 card 10cf,113d rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01 > (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:1f:1: chip 8086,248a card 10cf,113d rev 02 class 01,01,8a hdr 00 > (II) PCI: 00:1f:3: chip 8086,2483 card 10cf,113d rev 02 class 0c,05,00 hdr 00 > (II) PCI: 00:1f:5: chip 8086,2485 card 10cf,112f rev 02 class 04,01,00 hdr 00 > (II) PCI: 00:1f:6: chip 8086,2486 card 10cf,10d1 rev 02 class 07,03,00 hdr 00 > (II) PCI: 01:0a:0: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82 > (II) PCI: 01:0a:1: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82 > (II) PCI: 01:0d:0: chip 10ec,8139 card 10cf,111c rev 10 class 02,00,00 hdr 00 > (II) PCI: 01:0e:0: chip 10cf,2010 card 10cf,112b rev 01 class 0c,00,10 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:30:0), (0,1,3), BCTRL: 0x04 (VGA_EN is cleared) > (II) Bus 1 I/O range: > [0] -1 0x00002000 - 0x000020ff (0x100) IX[B] > [1] -1 0x00002400 - 0x000024ff (0x100) IX[B] > [2] -1 0x00002800 - 0x000028ff (0x100) IX[B] > [3] -1 0x00002c00 - 0x00002cff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xe0200000 - 0xe02fffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19 > (--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xe0200000 - 0xe03fffff (0x200000) MX[B]E > [1] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [2] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [3] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [4] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [5] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [6] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [7] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [8] -1 0x00001800 - 0x000018ff (0x100) IX[B]E > [9] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [10] -1 0x00001880 - 0x000018ff (0x80) IX[B]E > [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [12] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E > [13] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [18] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [19] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E > (II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to 0xe02007ff > (II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000187f > (II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf > (II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to 0x00001c1f > (II) PCI I/O resource overlap reduced 0x000018c0 from 0x000018ff to 0x000018df > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [1] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [2] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [3] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [4] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [5] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [6] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [7] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [8] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [9] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [10] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [12] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [13] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [18] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [19] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [15] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [16] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [18] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [19] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [20] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [25] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [26] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > (II) LoadModule: "vga" > (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o > (II) Module vga: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 4.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.3 > (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic > (II) Primary Device is: PCI 00:02:0 > (--) Chipset generic found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [15] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [16] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [18] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [19] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [20] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [25] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [26] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [17] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [18] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [19] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [20] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [21] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [22] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [23] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [24] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [25] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [26] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [27] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [28] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [29] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > [30] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [31] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) VGA(0): initializing int10 > (==) VGA(0): Write-combining range (0xa0000,0x20000) was already clear > (==) VGA(0): Write-combining range (0xf0000,0x10000) > (WW) VGA(0): Bad V_BIOS checksum > (II) VGA(0): Primary V_BIOS segment is: 0xc000 > (**) VGA(0): Depth 8, (--) framebuffer bpp 8 > (==) VGA(0): RGB weight 666 > (==) VGA(0): Default visual is PseudoColor > (==) VGA(0): Using gamma correction (1.0, 1.0, 1.0) > (**) VGA(0): videoRam: 8192 kBytes (using 64 kBytes). > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) VGA(0): Virtual size is 320x200 (pitch 320) > (**) VGA(0): Built-in mode "Generic 320x200 default mode": 12.6 MHz (scaled from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan) > (II) VGA(0): Modeline "Generic 320x200 default mode" 12.59 320 336 384 400 200 206 207 224 vscan 2 -hsync +vsync > (==) VGA(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0xe0000000 - 0xe007ffff (0x80000) MS[B] > [1] 0 0xe8000000 - 0xefffffff (0x8000000) MS[B] > [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [7] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [8] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [9] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [10] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [12] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [13] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [14] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [15] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) > [16] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) > [17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [20] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [21] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [22] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [23] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [24] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [25] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [26] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [27] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [28] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [29] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [30] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [31] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > [32] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [33] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear > (II) Setting vga for screen 0. > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (**) Option "Protocol" "SysMouse" > (**) Mouse0: Protocol: "SysMouse" > (**) Option "CorePointer" > (**) Mouse0: Core Pointer > (**) Option "Device" "/dev/sysmouse" > (**) Option "BaudRate" "1200" > (**) Option "StopBits" "2" > (**) Option "DataBits" "8" > (**) Option "Parity" "None" > (**) Option "Vmin" "1" > (**) Option "Vtime" "0" > (**) Option "FlowControl" "None" > (==) Mouse0: Buttons: 3 > (**) Mouse0: BaudRate: 1200 > (II) Keyboard "Keyboard0" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (**) Option "BaudRate" "1200" > Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! > Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list! > -- > Larry Rosenman http://www.lerctr.org/~ler > Phone: +1 972-414-9812 E-Mail: [email protected] > US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > To Unsubscribe: send mail to [email protected] > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to [email protected] with "unsubscribe freebsd-mobile" in the body of the message