Re: IBM TP 600E - Xircom Cardbus

"Kevin Oberman" <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
> Date: Sun, 21 Sep 2003 14:17:14 +1000
> From: Jason Friedland <[email protected]>
> Sender: [email protected]
> 
> Hi there
> 
> I'm after a few pointers for installing FreeBSD 5.1 on a TP 600E. I have
> installed it on this machine previously but couldn't get my Xircom
> CardBus Ethernet 10/100 + 56K Modem card working so threw the towel in.
> 
> I have Slackware 9 on it right now and it works flawlessly after a bit
> of tweaking (well, all the devices such as the Xircom, sound, DVD work)
> but really want to get 5.1 going.
> 
> After googling around for FreeBSD on a 600E I found an article 
> (focussing on 4.7) which suggested I recompile the kernel in order to 
> get the Xircom working. I did this, rebooted and still no ethernet.
> 
> I know this is a bit vague but if anyone has some tips on how to get
> this card going I'd be most grateful.

First, CardBus is only supported in 5.x, so 4.7 will not do it for
you.

I have used this exact card with my old 600E on 5.?, but I am not sure
when I last tried it. It's possible that there has been a regression,
but it does still work with my T30, so I expect it still will work on
my 600E.

One key to the 600e is to turn off ACPI. APM works just fine, but the
ACPI has serious problems. I have not tried it for a while, so the
situation might have improved, but I'd start with APM and get things
working.

Build the GENERIC configuration and it should "just work". The modem
will be si04/cuaa0. The Ethernet should be dc0.

You may have to add several lines to /boot/loader.conf. On my T30 I have:
hw.ata.atapi_dma="1"
hw.pci.allow_unsupported_io_range="1"
hw.cbb.start_memory="0x20000000"
apm_load="1"

I think the same values will work for the 600E, but it is at another
office, so I can't confirm that right now.
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [email protected]			Phone: +1 510 486-8634
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.