Re: [acpi-jp 2716] Dell D800 ACPI Issues

Mike Hunter <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
On Oct 07, "Nate Lawson" wrote:

> On Sun, 5 Oct 2003, Mike Hunter wrote:
> > I am trying to get acpi to work better on my Dell D800.  I see the
> > following warning message when I boot:
> >
> >         -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
> >         -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
> >         -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
> >         -0166: *** Error: UtAllocate: Attempt to allocate zero bytes
> >
> > It repeats that quite a bit.
> 
> I've been following down this issue.  It is known.

Thanks.  I'm happy to test patches and such, just let me know.

Also, thanks for the advice about staying away from s[234]...it might be worth
mentioning in the acpiconf man page that they are experimental.  I'll also try
the config change you suggested for closing the lid.

> > I have flashed my bios up to A3 (the latest as of a month ago).
> >
> > I have placed acpidump and acpidump -d here:
> >
> > http://www.lusars.net/~mhunter/acpi.out
> > http://www.lusars.net/~mhunter/acpi.out.txt
> >
> > I will follow-up this post with some results of acpiconf...but I want to
> > send this first because I seem to remember that it makes my computer crash
> > :)
> >
> > My sources are from Sep. 29 (5.1-CURRENT)
> 
> It would help if you also send the output of acpidump -t.  This gives the
> fixed tables and is short.

/*
  RSD PTR: OEM=DELL, ACPI_Rev=1.0x (0)
        RSDT=0x1fff0000, cksum=98
 */
/*
  RSDT: Length=44, Revision=1, Checksum=208,
        OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d3050f,
        Creator ID=ASL, Creator Revision=0x61
        Entries={ 0x1fff0400, 0x1fff0800 }
 */
/*
  FADT: FACS=0x1ffff800, DSDT=0x1fff0c00
        INT_MODEL=PIC
        Preferred_PM_Profile=Unspecified (0)
        SCI_INT=9
        SMI_CMD=0xb2, ACPI_ENABLE=0x70, ACPI_DISABLE=0x71, S4BIOS_REQ=0x97
        PSTATE_CNT=0x80
        PM1a_EVT_BLK=0x800-0x803
        PM1a_CNT_BLK=0x804-0x805
        PM2_CNT_BLK=0x820-0x820
        PM_TMR_BLK=0x808-0x80b
        GPE0_BLK=0x828-0x82f
        P_LVL2_LAT=50 us, P_LVL3_LAT=50 us
        FLUSH_SIZE=0, FLUSH_STRIDE=0
        DUTY_OFFSET=1, DUTY_WIDTH=3
        DAY_ALRM=0, MON_ALRM=0, CENTURY=0
        IAPC_BOOT_ARCH= Flags={WBINVD,PROC_C1,PWR_BUTTON,SLP_BUTTON,DCK_CAP}
 */
/*
  FACS: Length=64, HwSig=0x0000007f, Firm_Wake_Vec=0x00000000
        Global_Lock=
        Flags=S4BIOS
        Version=0
 */
/*
  DSDT: Length=11563, Revision=1, Checksum=178,
        OEMID=INT430, OEM Table ID=SYSFexxx, OEM Revision=0x1001,
        Creator ID=MSFT, Creator Revision=0x100000e
 */
/*
  ASF!: Length=91, Revision=16, Checksum=122,
        OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d3050f,
        Creator ID=ASL, Creator Revision=0x61
 */

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.