Re: fan speed, temp, etc... on a thinkpad?
[email protected] (Hans Lambermont)
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Eric Pogroski wrote:
> Jesse Guardiani wrote:
>> Does anyone have a temp monitoring program running on a thinkpad?
...
>> I've tried lmmon, but it gives this output, which looks fairly bogus:
>>
>> Motherboard Temp Voltages
>>
>> 255C / 491F / 528K Vcore1: +3.984V
>> Vcore2: +3.984V
>> Fan Speeds + 3.3V: +3.984V
>> + 5.0V: +6.654V
>> 1: 0 rpm +12.0V: +15.938V
>> 2: 0 rpm -12.0V: -15.938V
>> 3: 0 rpm - 5.0V: -6.654V
>
> Hi. Try xmbmon from ports/x11, seems to work (somewhat) on thinkpads (I
> use it on 2, a 390x and a 600x). It give's at least a good approximation
> of the temperature, does voltage correctly, but I can't get it to read
> the fans.
I'm using a T30 and I don't get any useful info out of either lmmon or
mbmon :
gagh# mbmon
No Hardware Monitor found!!
InitMBInfo: Unknown error: 0
gagh# mbmon -d -A
SMBus[Intel8XX(ICH/ICH2/ICH3/ICH4/ICH5)] found, but No HWM available on it!!
Summary of Detection:
* No monitors found.
InitMBInfo: Unknown error: 0
gagh# lmmon
IOCTL: Device not configured
While there is a SMBus device available:
gagh# ls -la /dev/smb0
crw------- 1 root wheel 106, 0 Nov 3 10:19 /dev/smb0
gagh# dmesg | grep SMB
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 9 at device 31.3 on pci0
smb0: <SMBus generic I/O> on smbus0
This is on an IBM T30 running 5.1-CURRENT as of Oct 23.
Any tips anyone ?
regards,
Hans
ps. for those interested in monitoring their systems: the recently added
SMART Disk Monitoring in ports/sysutils/smartmontools works perfectly
for me. Highly recommended.
--
http://lambermont.webhop.org/ () ASCII-ribbon campaign against vCards,
/\ HTML-mail and proprietary formats.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"