Re: HP Pavilion ze4400 and 5.1-RELEASE

Additional info:

When booting with the card in, it seems to detect the card fine, but the 
lockup reappears when I ifconfig the correct ssid and wepkey for the 
local Wi-Fi location.  (I say this because I thought I had it working, 
but then realized I had a case mismatch in the SSID) :( 

Also, I noticed the "sis0: watchdog timeout" issue goes away when I boot 
the system w/ verbose logging - for now - is there a loader.conf tweak 
to automatically select that at the boot menu?

Best Wishes - Peter

On Tuesday 02 December 2003 01:04 am, Peter Losher wrote:

> All of that would be moot if I could get the PCMCIA wireless card to
> work.   I purchased a Airlink+ PCMCIA card at Fry's (it's the only
> 16bit PC Card 802.11b card they sell these days, although they do keep
> a heady supply)  It's a fine, if ugly, card - It's using a Prism v2.5
> chipset, and works fine on my production laptop (Dell Inspiron 5100)
> under the wi driver.  However, any PC Card you stick in the slot
> causes the whole system to freeze.... hard.
>
> I have tried all the tricks I used on this Dell, turning on
> hw.pci.allow_unsupported_io_range, but to no avail.  Does anyone here
> have a recent HP Pavilion laptop, and if so, how did you get your
> wireless card to work?

-- 
[email protected] | ISC | OpenPGP Key E8048D08 | "The bits must flow"

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"