ACPI/PCI-bus issue with compaq evo n160
Fredrik Lindberg <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hi, Thank you for your reply. The information you requested is avaiable at http://shapeshifter.se/~fredde/tmp/db http://shapeshifter.se/~fredde/tmp/dmesg.acpi-pci.enabled Fredrik On Thu, Dec 11, 2003 at 01:42:06PM -0500, John Baldwin ([email protected]) wrote: > [ Resent due to NO.*SPAM bounce the first time ] > > On 10-Dec-2003 Fredrik Lindberg wrote: > > Hi, > > > > I have a Compaq evo n160 running > > FreeBSD biocandy 5.2-RC FreeBSD 5.2-RC #10: Mon Dec 8 19:08:38 CET 2003 > > > > The machine fails (and always has) to boot with acpi enabled > > (locks up when mounting /), however, I managed to find out that > > booting with the following option > > > > debug.acpi.disable="pci" > > > > in /boot/loader.conf made the machine boot correctly and acpi related > > functions such as battry monitoring worked just fine. > > > > But, and a huge but, no pci devices are detected during boot > > (maybe quite obvious because of that debug option) > > All pci-devices works perfectly with acpi disabled. > > > > Now, is there any chance to make freebsd use acpi and the > > "normal" pci-bus driver at the same time, overriding the > > acpi pci-bus implementation? > > > > I believe linux has a kernel option called pci=noacpi (atleast acording to google), > > which does this. > > > > With acpi enabled scanpci reports all the pci devices, but pciconf -l > > doesn't return anything. > > With acpi disabled, scanpci reports all pci devices, pciconf -l > > reports all devices. > > > > dmesg output with acpi enabled > > http://shapeshifter.se/~fredde/tmp/dmesg.acpi.enabled > > > > dmesg out with acpi disabled > > http://shapeshifter.se/~fredde/tmp/dmesg.acpi.disabled > > > > Any, and I mean any, help on this will be very appreciated. > > If you can drop into ddb and do a 'show intrcnt' when the machine > locks up that might help fix the hang. It sounds like the interrupt > routing may not have worked correctly. Also, a dmesg of acpi > with pci enabled would be helpful. > > -- > > John Baldwin <[email protected]> <>< http://www.FreeBSD.org/~jhb/ > "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/ ----- End forwarded message ----- _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"