Re: More power patches

On 10 Jan, Don Lewis wrote:

> fwohci0: vendor=104c, dev=8026
> fwohci0: <1394 Open Host Controller Interface> mem 0xc0204000-0xc0207fff,0xc0209000-0xc02097ff irq 11 at device 7.0 on pci2
> fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xc0209000
> fwohci0: OHCI version 0.0 (ROM=0)
> fwohci0: invalid OHCI version
> fwohci0: FireWire init failed with err=6
> device_probe_and_attach: fwohci0 attach returned 5
> fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8400-0x843f mem 0xc0208000-0xc0208fff irq 11 at device 8.0 on pci2
> fxp0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0208000
> fxp0: Ethernet address 00:06:1b:d4:72:bb
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: could not setup irq
> inphy0: detached
> miibus0: detached
> device_probe_and_attach: fxp0 attach returned 22

This is what I get with just the pci-subtractive patch.

fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xc0204000-0xc0207fff,0xc0209
000-0xc02097ff irq 11 at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:06:1b:00:20:09:dc:c3
fwohci0: Phy 1394a available \M-Q+\M^D\M-@\M-W+\M^D\M-@\M-]+\M^D\M-@\M-K+\M^D\M-
@\M-b+\M^D\M-@\M-h+\M^D\M-@\M-n+\M^D\M-@\M-t+\M^D\M-@\M-z+\M^D\M-@\M^?+\M^D\M-@\
M^\t\M^F\M-@\^D,\M^D\M-@\M-K+\M^D\M-@\M-K+\M^D\M-@%\M-*\M^D\M-@\M-K+\M^D\M-@\^E,
 1 ports.
fwohci0: Link \M-Q+\M^D\M-@\M-W+\M^D\M-@\M-]+\M^D\M-@\M-K+\M^D\M-@\M-b+\M^D\M-@\
M-h+\M^D\M-@\M-n+\M^D\M-@\M-t+\M^D\M-@\M-z+\M^D\M-@\M^?+\M^D\M-@\M^\t\M^F\M-@\^D
,\M^D\M-@\M-K+\M^D\M-@\M-K+\M^D\M-@%\M-*\M^D\M-@\M-K+\M^D\M-@\^E, max_rec 2048 b
ytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:09:dc:c3
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8400-0x843f mem 0xc02080
00-0xc0208fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:06:1b:d4:72:bb
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"