Hi,
I have a fujitsu-siemens lifebook s6120, running FreeBSD 4.9-STABLE.
I'd like to set the console display to the VESA_800x600.
The mode supported are:
mode# flags type size font window linear buffer
------------------------------------------------------------------------------
0 (0x000) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k
1 (0x001) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k
2 (0x002) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k
3 (0x003) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k
4 (0x004) 0x00000003 G 320x200x2 1 8x8 0xb8000 32k 32k 0x00000000 32k
5 (0x005) 0x00000003 G 320x200x2 1 8x8 0xb8000 32k 32k 0x00000000 32k
6 (0x006) 0x00000003 G 640x200x1 1 8x8 0xb8000 32k 32k 0x00000000 32k
13 (0x00d) 0x00000003 G 320x200x4 4 8x8 0xa0000 64k 64k 0x00000000 256k
14 (0x00e) 0x00000003 G 640x200x4 4 8x8 0xa0000 64k 64k 0x00000000 256k
16 (0x010) 0x00000003 G 640x350x2 2 8x14 0xa0000 64k 64k 0x00000000 128k
18 (0x012) 0x00000003 G 640x350x4 4 8x14 0xa0000 64k 64k 0x00000000 256k
19 (0x013) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k
20 (0x014) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k
21 (0x015) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k
22 (0x016) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k
23 (0x017) 0x00000001 T 40x25 8x16 0xb8000 32k 32k 0x00000000 32k
24 (0x018) 0x00000001 T 80x25 8x16 0xb8000 32k 32k 0x00000000 32k
26 (0x01a) 0x00000003 G 640x480x4 4 8x16 0xa0000 64k 64k 0x00000000 256k
27 (0x01b) 0x00000003 G 640x480x4 4 8x16 0xa0000 64k 64k 0x00000000 256k
28 (0x01c) 0x00000003 G 320x200x8 1 8x8 0xa0000 64k 64k 0x00000000 64k
30 (0x01e) 0x00000001 T 80x50 8x8 0xb8000 32k 32k 0x00000000 32k
32 (0x020) 0x00000001 T 80x30 8x16 0xb8000 32k 32k 0x00000000 32k
34 (0x022) 0x00000001 T 80x60 8x8 0xb8000 32k 32k 0x00000000 32k
37 (0x025) 0x00000003 G 320x240x8 4 8x8 0xa0000 64k 64k 0x00000000 256k
112 (0x070) 0x00000000 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k
113 (0x071) 0x00000001 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k
257 (0x101) 0x0000000f G 640x480x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
259 (0x103) 0x0000000f G 800x600x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
261 (0x105) 0x0000000f G 1024x768x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
263 (0x107) 0x0000000f G 1280x1024x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
273 (0x111) 0x0000000f G 640x480x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
274 (0x112) 0x0000000f G 640x480x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
276 (0x114) 0x0000000f G 800x600x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
277 (0x115) 0x0000000f G 800x600x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
279 (0x117) 0x0000000f G 1024x768x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
280 (0x118) 0x0000000f G 1024x768x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
282 (0x11a) 0x0000000f G 1280x1024x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
283 (0x11b) 0x0000000f G 1280x1024x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
310 (0x136) 0x0000000f G 1024x600x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
314 (0x13a) 0x0000000f G 1600x1200x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
316 (0x13c) 0x0000000f G 1920x1440x8 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
327 (0x147) 0x0000000f G 1024x600x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
331 (0x14b) 0x0000000f G 1600x1200x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
333 (0x14d) 0x0000000f G 1920x1440x16 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
342 (0x156) 0x0000000f G 1024x600x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
346 (0x15a) 0x0000000f G 1600x1200x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
348 (0x15c) 0x0000000f G 1920x1440x32 1 8x16 0xa0000 64k 64k 0xd8000000
8000k
but when I try to set it I got:
vidcontrol -g 80x60 VESA_800x600
vidcontrol: cannot activate raster display: Operation not supported by device
While the text mode 80x60 works great (with 8x8 font).
The dmesg shows:
[...]
FreeBSD 4.9-STABLE #4: Sun Jan 25 04:10:18 GMT 2004
[email protected]:/usr/obj/usr/src/sys/FREEBSD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1399961964 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1399.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 527368192 (515008K bytes)
avail memory = 509669376 (497724K bytes)
Preloaded elf kernel "kernel" at 0xc0363000.
VESA: v3.0, 8000k memory, flags:0x1, mode table:0xc02f40c0 (1000040)
VESA: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
acpi0: <FUJ FJNB16C > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x3584) at 0.1
pci0: <unknown card> (vendor=0x8086, dev=0x3585) at 0.3
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem
0xd0000000-0xd007ffff,0xd8000000-0xdfffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
[...]
and in my kernel I have:
[...]
device agp
[...]
device sc0 at isa? flags 0x100
options VESA
options SC_PIXEL_MODE
[...]
In the same notebook a lot of Linux distros I have tested use the raster
display without problem so it should not a problem of the graphic card
itself. Probably I miss something but I really don't know what. Any idea ?
Should it be a font problem ? I don't load any fonts in rc.conf so I am using
the default ones.
Thanks ...
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.