Hi,
Forcing the return code seems to make everything work. ep0 is back.
Here is dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #9: Wed Mar 17 14:20:42 EST 2004
listless at goodol770.listless.net:/usr/obj/usr/src/sys/770-WAP-GW
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0947000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (quarter-micron) (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 234684416 (223 MB)
avail memory = 219971584 (209 MB)
Intel Pentium detected, installing workaround for F00F bug
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Found table, 5 entries at 0xc00f9f90
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
: ROUTE_INTERRUPT returned 0x81
: 0:1 INTD routed to irq 11
: ROUTE_INTERRUPT returned 0x81
: 0:3 INTA routed to irq 11
: ROUTE_INTERRUPT returned 0x81
: 0:5 INTA routed to irq 11
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 11 at device 1.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aue0: LINKSYS Inc. LINKSYS USB Adapter, rev 1.10/1.01, addr 2
aue0: Ethernet address: 00:04:5a:9c:e6:62
miibus0: <MII bus> on aue0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
piix0: <PIIX Timecounter> port 0xefa0-0xefaf at device 1.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20822000-0x20822fff at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
: 0:2 INTA routed to irq 11
cbb0: [MPSAFE]
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
: 0:2 INTB routed to irq 11
cbb1: [MPSAFE]
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <multimedia> at device 5.0 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <IBM3780> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <IBM0071> can't assign resources (port)
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
Timecounter "TSC" frequency 233864841 Hz quality 800
Timecounters tick every 10.000 msec
cbb0: bad Vcc request. ctrl=0x22, status=0x30000710
cbb_power: 5V
cbb0: bad Vcc request. ctrl=0x0, status=0x30000759
cbb_power: 0V
cbb0: bad Vcc request. ctrl=0x22, status=0x30000710
cbb_power: 5V
ep0: <3Com Megahertz 574B> at port 0x100-0x11f irq 11 function 0 config 1 on pccard0
Unknown ID: 0x201
ep0: Ethernet address 00:50:04:b3:c6:0e
ad0: 38154MB <TOSHIBA MK4018GAP> [77520/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.