Re: The Best Laptop

Andrew Marks <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
On Mon, Mar 29, 2004 at 09:17:01PM -0800, Brian Behlendorf wrote:
> 
> I've got this too, under 5-CURRENT, but I can't get atapicam to work; if I
> compile it in the kernel then it won't boot if the CD-RW is attached.
> Without it in the kernel, I can't burn CDs (unless there's some tool that
> supports IDE CD burning?).  Any idea?
> 
> They've gotten suspend/resume working under Linux: check out
> 
> http://mrohne.home.cern.ch/mrohne/P2120/P2120_Linux_S3.html
> 
> but it sounds like a Mighty Hack.
> 
> 	Brian
> 
> On Tue, 30 Mar 2004, Erich Dollansky wrote:
> > I have an Fujitsu P2120. FreeBSD 5.2 works but has problems with the
> > power settings. With other words, NT has a longer operating time than
> > FreeBSD on it.
> >
> > All other features of the machines did not make any problems.
> >
> > Erich
> >

I also have a P2120 running CURRENT.  I noticed that atapicam developed
some problems but have been doing alright without out it.  I have also
been getting along with out my USB 2.0 ports, or pretty much any USB
ports, save the one for the floppy drive which seems to work.  I was
wondering if either of you have USB support on your P2120s, and what
you may have done differently than me.  Also, there is a power
management device that also has no support.


dmesg
-------------------------------
ohci1: <NEC uPD 9210 USB controller> at device 9.0 on pci0
ohci1: Could not map memory
device_probe_and_attach: ohci1 attach returned 6
ohci1: <NEC uPD 9210 USB controller> at device 9.1 on pci0
ohci1: Could not map memory
device_probe_and_attach: ohci1 attach returned 6

pciconf -vl:
-------------------------------------------------
none3@pci0:9:0:	class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210/72010xx USB Open Host Controller'
    class    = serial bus
    subclass = USB
none4@pci0:9:1:	class=0x0c0310 card=0x11a310cf chip=0x00351033 rev=0x41 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD9210/72010xx USB Open Host Controller'
    class    = serial bus
    subclass = USB
none5@pci0:9:2:	class=0x0c0320 card=0x11a310cf chip=0x00e01033 rev=0x02 hdr=0x00
    vendor   = 'NEC Electronics Hong Kong'
    device   = 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.