| Newsgroups |
gmane.os.freebsd.devel.mobile |
| Message-ID |
<[email protected]> |
Hello All,
laptop Dell Latitude
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x107f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device
0.0 on cardbus0 ^^^^^^
xl0: Ethernet address: 00:50:da:55:a2:ce
miibus0: <MII bus> on xl0
sio2: <3COM 3CCM156> at port 0x3e8-0x3ef irq 11 function 0 config 34 on pccard1
sio2: type 16550A ^^^^^^^
sio2: unable to activate interrupt in fast mode - using normal mode
xl0: watchdog timeout messages occur every time i try to work with this laptop through network.
Why the system assign the same IRQ 11 to 2 different devices? I think that's the reason of timeouts.
Is there any way to handle this matter and to assign resources manually.
I supply you with info about the system below.
Thank you in advance.
#uname -a
FreeBSD dayzin 5.2-RELEASE FreeBSD 5.2-RELEASE #2:
Mon Apr 19 12:03:43 YEKST 2004
root@dayzin:/usr/obj/usr/src/sys/DAYZIN i386
kernel
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.2 2003/12/07 23:52:53 scottl Exp $
machine i386
##cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
##ident GENERIC
ident DAYZIN
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
##options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as /, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
##options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
##options SMP # Symmetric MultiProcessor Kernel
##device apic # I/O APIC
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
##device ahb # EISA AHA1742 family
##device ahc # AHA2940 and onboard AIC7xxx devices
##device ahd # AHA39320/29320 and onboard AIC79xx devices
##device amd # AMD 53C974 (Tekram DC-390(T))
##device isp # Qlogic family
##device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
##device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
##device trm # Tekram DC395U/UW/F DC315U adapters
##device adv # Advansys SCSI adapters
##device adw # Advansys wide SCSI adapters
##device aha # Adaptec 154x SCSI adapters
##device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
##device bt # Buslogic/Mylex MultiMaster SCSI adapters
##device ncv # NCR 53C500
##device nsp # Workbit Ninja SCSI-3
##device stg # TMC 18C30/18C50
# SCSI peripherals
##device scbus # SCSI bus (required for SCSI)
##device ch # SCSI media changers
##device da # Direct Access (disks)
##device sa # Sequential Access (tape etc)
##device cd # CD
##device pass # Passthrough device (direct SCSI access)
##device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
##device amr # AMI MegaRAID
##device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
##device ciss # Compaq Smart RAID 5*
##device dpt # DPT Smartcache III, IV - See NOTES for options
##device iir # Intel Integrated RAID
##device ips # IBM (Adaptec) ServeRAID
##device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
##device aac # Adaptec FSA RAID
##device aacp # SCSI passthrough for aac (requires CAM)
##device ida # Compaq Smart RAID
##device mlx # Mylex DAC960 family
##device pst # Promise Supertrak SX6000
##device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
##device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard nics included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of ethernet chips
device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
##device uhci # UHCI PCI->USB interface
##device ohci # OHCI PCI->USB interface
##device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
##device ugen # Generic
##device uhid # "Human Interface Devices"
##device ukbd # Keyboard
##device ulpt # Printer
##device umass # Disks/Mass storage - Requires scbus and da
##device ums # Mouse
##device urio # Diamond Rio 500 MP3 player
##device uscanner # Scanners
# USB Ethernet, requires mii
##device aue # ADMtek USB ethernet
##device axe # ASIX Electronics USB ethernet
##device cue # CATC USB ethernet
##device kue # Kawasaki LSI USB ethernet
# FireWire support
##device firewire # FireWire bus code
##device sbp # SCSI over FireWire (Requires scbus and da)
##device fwe # Ethernet over FireWire (non-standard!)
##================= DAYZ Options =================================
options POWERFAIL_NMI
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
##options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPDIVERT #divert sockets
options DUMMYNET
options HZ=1000
#dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #2: Mon Apr 19 12:03:43 YEKST 2004
[email protected]:/usr/obj/usr/src/sys/DAYZIN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc080d000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (127 MB)
avail memory = 120696832 (115 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fb8b0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:2 INTA BIOS irq 11
pci_cfgintr: 0:3 INTA BIOS irq 11
pci_cfgintr: 0:3 INTB BIOS irq 11
pci_cfgintr: 0:7 INTD BIOS irq 11
pci0: <display, VGA> at device 2.0 (no driver attached)
cbb0: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
sio1: <SMCf010> at port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on isa0
sio1: type 16550A
unknown: <PNP0401> can't assign resources (port)
unknown: <CSC0010> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by
default
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x107f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device
0.0 on cardbus0
xl0: Ethernet address: 00:50:da:55:a2:ce
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pccard1: Allocation failed for cfe 32
pccard1: Allocation failed for cfe 33
sio2: <3COM 3CCM156> at port 0x3e8-0x3ef irq 11 function 0 config 34 on pccard1
sio2: type 16550A
sio2: unable to activate interrupt in fast mode - using normal mode
GEOM: create disk ad0 dp=0xc206f960
ad0: 6194MB <IBM-DADA-26480> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: superblock summary recomputed
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
#pciconf -l
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71928086 rev=0x02 hdr=0x00
none0@pci0:2:0: class=0x030000 card=0x00741028 chip=0x000410c8 rev=0x01 hdr=0x00
cbb0@pci0:3:0: class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
cbb1@pci0:3:1: class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x01 hdr=0x00
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
none1@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
none2@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x01 hdr=0x00
xl0@pci2:0:0: class=0x020000 card=0x5c5710b7 chip=0x525710b7 rev=0x10 hdr=0x00
#pciconf -l -v
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71928086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Not Implemented)'
class = bridge
subclass = HOST-PCI
none0@pci0:2:0: class=0x030000 card=0x00741028 chip=0x000410c8 rev=0x01 hdr=0x00
vendor = 'Neomagic Corporation'
device = 'NM2160 MagicGraph 128XD'
class = display
subclass = VGA
cbb0@pci0:3:0: class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1131 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:3:1: class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1131 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-unknown
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
none1@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none2@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
xl0@pci2:0:0: class=0x020000 card=0x5c5710b7 chip=0x525710b7 rev=0x10 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3CCFE575CT Cyclone Fast Ethernet CardBus PC Card'
class = network
subclass = ethernet
--
Best regards,
DYZ mailto:[email protected]
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"