Re: irq conflict: IBM Creditcard Ether II adapter
Zhang Weiwu <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Very simple. Putting this line to /etc/pccard.conf solved the problem:
irq 9
It seems pccard strictly follow the irq sequence defined in
/etc/default/pccard.conf (which is 5,7,9..) and don't move to irq 9 even
5, 7, are occupied.
I don't know why after I created that /etc/pccard.conf I begin to receiv
this message upon booting, but anyway this does not seems to affect the
system so I simply ignore it:
Setup PC-CARD: memory beeppccardd: /etc/defaults/pccard.conf: syntax
error at line 51, near Adaptec, Inc.
pccardd: /etc/defaults/pccard.conf: syntax error at line 51, near
/APA-1460 .*/
pccardd: /etc/defaults/pccard.conf: syntax error at line 52, near config
pccardd: /etc/defaults/pccard.conf: syntax error at line 52, near 0x9
pccardd: /etc/defaults/pccard.conf: syntax error at line 52, near aic
pccardd: /etc/defaults/pccard.conf: syntax error at line 52, near ?
pccardd: /etc/defaults/pccard.conf: syntax error at line 53, near insert
pccardd: /etc/defaults/pccard.conf: syntax error at line 53, near camcontrol
pccardd: /etc/defaults/pccard.conf: syntax error at line 53, near rescan
Zhang Weiwu wrote:
> Hello. My uname on my Thinkpad 380XD (using OLDCARD kernel) is
>
> FreeBSD thinkpad.realss 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Sat
> May 1 01:18:09 CST 2004
> [email protected]:/usr/obj/usr/src/sys/TP380XD i386
>
> I got the following message starting pccardd(8):
>
> May 1 11:21:00 thinkpad pccardd[913]: Card "IBM Corp."("Ethernet")
> [0934214] [PC-NIC ENCC
> 990010759-001A] matched "IBM Corp." ("Ethernet") [(null)] [(null)]
> May 1 11:21:00 thinkpad pccardd[913]: Ether=00:04:ac:90:ef:c4
> May 1 11:21:00 thinkpad pccardd[913]: Failed to allocate IRQ for IBM
> Corp.
> May 1 11:21:00 thinkpad pccardd[913]: pccardd started
>
> Adjusting hint.ed.0.irq or adding "irq 5" to /etc/pccard.conf doesn't
> help. I searched the web it seems my IBM Creditcard Ether II perhaps
> is an irq selfish card occupying irq 5. But irq 5 is taken by pcm.
>
> According to pcm(4) manual, If it's non-PnP card, I can adjust
> hint.pcm.0.irq; but if the sound card is a PnP card, the device hints
> doesn't work, irq is assigned automatically, which is right my situation.
>
> I also tried to adjust loader.conf by adding hw.pcic entries to
> disable PCI irq routing and also set hw.pcic.ignore_pci but that
> doesn't work.
>
> As far as I can understand, upon booting pcm finds irq 5 is free, and
> takes it; after boot, pccardd(8) wish to take irq 5 too and create an
> irq conflict. Moving pcm away from irq 5 would solve the problem, but
> it's not possible with my limited knowledge; moving the card away from
> irq 5 perhaps will work, but it's as well beyond my knowledge.
>
> Can you enlight me what to do now? Here is my desg: (my kernel config
> file is attached.)
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.2.1-RELEASE #0: Sat May 1 01:18:09 CST 2004
> [email protected]:/usr/obj/usr/src/sys/TP380XD
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0844000.
> Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc08441f4.
> Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc08442a0.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Pentium/P55C (quarter-micron) (232.11-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x581 Stepping = 1
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 33357824 (31 MB)
> avail memory = 22990848 (21 MB)
> Intel Pentium detected, installing workaround for F00F bug
> VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc07809c2 (1000022)
> VESA: MagicGraph 128XD 40K SVGA BIOS
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcibios: BIOS version 2.10
> Using $PIR table, 4 entries at 0xc00fb270
> pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pci_cfgintr: 0:3 INTA BIOS irq 11
> pci_cfgintr: 0:6 INTD BIOS irq 11
> pci0: <bridge, PCI-CardBus> at device 2.0 (no driver attached)
> pci0: <bridge, PCI-CardBus> at device 2.1 (no driver attached)
> pci0: <display, VGA> at device 3.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 6.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff at device
> 6.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f
> irq 11 at device 6.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ubt0: vendor 0x0a12 product 0x0001, rev 1.10/4.43, addr 2
> ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
> ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83,
> isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294
> pci0: <bridge, PCI-unknown> at device 6.3 (no driver attached)
> orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
> pcic0: management irq 10
> pccard0: <PC Card 16-bit bus (classic)> on pcic0
> pccard1: <PC Card 16-bit bus (classic)> on pcic0
> ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0700>
> can't assign resources (port)
> unknown: <PNP0c02> can't assign resources (port)
> unknown: <PNP0400> can't assign resources (port)
> pcm0: <CS423x> at port 0x220-0x233,0x388-0x38b,0x530-0x537 irq 5 drq
> 0,1 on isa0unknown: <IBM0071> can't assign resources (port)
> Timecounter "TSC" frequency 232106150 Hz quality 800
> Timecounters tick every 10.000 msec
> GEOM: create disk ad0 dp=0xc19aa960
> ad0: 3102MB <IBM-DTCA-23240> [6304/16/63] at ata0-master UDMA33
> pccard: card inserted, slot 1
> acd0: CDROM <SANYO CRD-S372B> at ata0-slave PIO3
> Mounting root from ufs:/dev/ad0s1a
> pccard: card removed, slot 1
> pccard: card inserted, slot 1
>
>
>------------------------------------------------------------------------
>
>machine i386
>cpu I586_CPU
>ident TP380XD
>
>#To statically compile in device wiring instead of /boot/device.hints
>#hints "GENERIC.hints" #Default places to look for devices.
>
>#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>
>options SCHED_4BSD #4BSD scheduler
>options INET #InterNETworking
>options INET6 #IPv6 communications protocols
>options FFS #Berkeley Fast Filesystem
>options SOFTUPDATES #Enable FFS soft updates support
>options UFS_ACL #Support for access control lists
>options UFS_DIRHASH #Improve performance on big directories
>options MD_ROOT #MD is a potential root device
>options NFSCLIENT #Network Filesystem Client
>options NFS_ROOT #NFS usable as /, requires NFSCLIENT
>options CD9660 #ISO 9660 Filesystem
>options PROCFS #Process filesystem (requires PSEUDOFS)
>options PSEUDOFS #Pseudo-filesystem framework
>options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
>options COMPAT_FREEBSD4 #Compatible with FreeBSD4
>options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
>options KTRACE #ktrace(1) support
>options SYSVSHM #SYSV-style shared memory
>options SYSVMSG #SYSV-style message queues
>options SYSVSEM #SYSV-style semaphores
>options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
>options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
>options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
>options PFIL_HOOKS # pfil(9) framework
>options VESA
>options SC_PIXEL_MODE
>
># Debugging for use in -current
>#options DDB #Enable the kernel debugger
>#options INVARIANTS #Enable calls of extra sanity checking
>options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
>#options WITNESS #Enable checks to detect deadlocks and cycles
>#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
>
>device isa
>device pci
>
># Floppy drives
>device fdc
>
># ATA and ATAPI devices
>device ata
>device atadisk # ATA disk drives
>device atapicd # ATAPI CDROM drives
>options ATA_STATIC_ID #Static device numbering
>
># SCSI peripherals
>device scbus # SCSI bus (required for SCSI)
>device ch # SCSI media changers
>device da # Direct Access (disks)
>device pass # Passthrough device (direct SCSI access)
>device ses # SCSI Environmental Services (and SAF-TE)
>
># atkbdc0 controls both the keyboard and the PS/2 mouse
>device atkbdc # AT keyboard controller
>device atkbd # AT keyboard
>device psm # PS/2 mouse
>
>device vga # VGA video card driver
>
>device splash # Splash screen and screen saver support
>
># syscons is the default console driver, resembling an SCO console
>device sc
>
># Enable this for the pcvt (VT220 compatible) console driver
>#device vt
>#options XSERVER # support for X server on a vt console
>#options FAT_CURSOR # start with block cursor
>
># Floating point support - do not disable.
>device npx
>
># Power management support (see NOTES for more options)
>device apm
># Add suspend/resume support for the i8254.
>device pmtimer
>
># PCCARD (PCMCIA) support
># Pcmcia and cardbus bridge support
>nodevice cbb # cardbus (yenta) bridge
>#nodevice pcic # ExCA ISA and PCI bridges
>nodevice pccard # PC Card (16-bit) bus
>nodevice cardbus # CardBus (32-bit) bus
>device card 1 # pccard bus
>device pcic # PCMCIA bridge
>
># Serial (COM) ports
>device sio # 8250, 16[45]50 based serial ports
>
># Parallel port
>device ppc
>device ppbus # Parallel port bus (required)
>device lpt # Printer
>device plip # TCP/IP over parallel
>device ppi # Parallel port interface device
>#device vpo # Requires scbus and da
>
># If you've got a "dumb" serial or parallel PCI card that is
># supported by the puc(4) glue driver, uncomment the following
># line to enable it (connects to the sio and/or ppc drivers):
>#device puc
>
># PCI Ethernet NICs.
>device de # DEC/Intel DC21x4x (``Tulip'')
>device em # Intel PRO/1000 adapter Gigabit Ethernet Card
>device txp # 3Com 3cR990 (``Typhoon'')
>device vx # 3Com 3c590, 3c595 (``Vortex'')
>
># PCI Ethernet NICs that use the common MII bus controller code.
># NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
>device miibus # MII bus support
>device bfe # Broadcom BCM440x 10/100 ethernet
>device bge # Broadcom BCM570xx Gigabit Ethernet
>device dc # DEC/Intel 21143 and various workalikes
>device fxp # Intel EtherExpress PRO/100B (82557, 82558)
>device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
>device re # RealTek 8139C+/8169/8169S/8110S
>device rl # RealTek 8129/8139
>device sf # Adaptec AIC-6915 (``Starfire'')
>device sis # Silicon Integrated Systems SiS 900/SiS 7016
>device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
>device ste # Sundance ST201 (D-Link DFE-550TX)
>device ti # Alteon Networks Tigon I/II gigabit ethernet
>device tl # Texas Instruments ThunderLAN
>device tx # SMC EtherPower II (83c170 ``EPIC'')
>device vr # VIA Rhine, Rhine II
>device wb # Winbond W89C840F
>device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
># ISA Ethernet NICs. pccard nics included.
>device cs # Crystal Semiconductor CS89x0 NIC
># 'device ed' requires 'device miibus'
>device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
>device ex # Intel EtherExpress Pro/10 and Pro/10+
>device ep # Etherlink III based cards
>device fe # Fujitsu MB8696x based cards
>device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
>device lnc # NE2100, NE32-VL Lance Ethernet cards
>device sn # SMC's 9000 series of ethernet chips
>device xe # Xircom pccard ethernet
>
># ISA devices that use the old ISA shims
>#device le
>
># Pseudo devices - the number indicates how many units to allocate.
>device random # Entropy device
>device loop # Network loopback
>device ether # Ethernet support
>device sl # Kernel SLIP
>device ppp # Kernel PPP
>device tun # Packet tunnel.
>device pty # Pseudo-ttys (telnet etc)
>device md # Memory "disks"
>device gif # IPv6 and IPv4 tunneling
>device faith # IPv6-to-IPv4 relaying (translation)
>
># The `bpf' device enables the Berkeley Packet Filter.
># Be aware of the administrative consequences of enabling this!
>device bpf # Berkeley packet filter
>
># USB support
>device uhci # UHCI PCI->USB interface
>device usb # USB Bus (required)
>#device udbp # USB Double Bulk Pipe devices
>device ugen # Generic
>device uhid # "Human Interface Devices"
>device ukbd # Keyboard
>device ulpt # Printer
>device umass # Disks/Mass storage - Requires scbus and da
>device ums # Mouse
>#device urio # Diamond Rio 500 MP3 player
>#device uscanner # Scanners
>
>device pcm
>
>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"