acpi problem

Dan Cojocar <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
	Hello,

	I get this acpi error:
ACPI-0335: *** Error: Cannot release Mutex [MUT1], not acquired
ACPI-1303: *** Error: Method execution failed [\\_TZ_.THRM._TMP] (Node 0xc40c19c0), AE_AML_MUTEX_NOT_ACQUIRED

I have a HP ze4560, please help me, to fix this.
Thanks.

Ps. Please CC me, i'm not on this list.

Here is my dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #5: Tue May 11 20:59:16 EEST 2004
    [email protected]:/usr/obj/usr/src/sys/FREE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc083a000.
Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc083a21c.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc083a2c8.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc083a378.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc083a424.
Preloaded elf module "/boot/kernel/msdosfs.ko" at 0xc083a4d0.
Preloaded elf module "/boot/kernel/pfsync.ko" at 0xc083a57c.
Preloaded elf module "/boot/kernel/pflog.ko" at 0xc083a628.
Preloaded elf module "/boot/kernel/pf.ko" at 0xc083a6d4.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc083a77c.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc083a828.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083a8d4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: mobile AMD Athlon(tm) XP2500+ (1855.20-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 502202368 (478 MB)
avail memory = 481759232 (459 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
unknown: I/O range not supported
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (2 Cx states)> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 9
pcib0: slot 6 INTA is routed to irq 5
pcib0: slot 8 INTA is routed to irq 3
pcib0: slot 9 INTA is routed to irq 9
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 10
pcib0: slot 18 INTA is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 5 INTA is routed to irq 10
drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem 0xe0100000-0xe010ffff,0xe8000000-0xefffffff irq 10 at device 5.0 on pci1
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xe0007000-0xe0007fff irq 5 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8400
pcm0: <Conexant CX20468 AC97 Codec>
pcm0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
pci0: <network> at device 9.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 10.0 (no driver attached)
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xe0000000-0xe0003fff,0xe0009000-0xe00097ff irq 10 at device 12.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe0009000
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0d:9d:71:9e:59:e6:24
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:9d:59:e6:24
fwe0: Ethernet address: 02:0d:9d:59:e6:24
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8080
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xe000a000-0xe000afff irq 11 at device 18.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8c00
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0d:9d:59:95:d4
sis0: [GIANT-LOCKED]
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: failed to get status.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1855197374 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38154MB <ST94011A> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pflog0: promiscuous mode enabled
    ACPI-0335: *** Error: Cannot release Mutex [MUT1], not acquired
    ACPI-1303: *** Error: Method execution failed [\\_TZ_.THRM._TMP] (Node 0xc40c19c0), AE_AML_MUTEX_NOT_ACQUIRED
pci0: driver added
pci0:2:0: reprobing on driver added
pci0:8:0: reprobing on driver added
pci0:9:0: reprobing on driver added
pci0:10:0: reprobing on driver added
pci0:17:0: reprobing on driver added
pci1: driver added
pci0: driver added
pci0:2:0: reprobing on driver added
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe0006000-0xe0006fff irq 9 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0006000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pci0:8:0: reprobing on driver added
pci0:9:0: reprobing on driver added
pci0:10:0: reprobing on driver added
pci0:17:0: reprobing on driver added
pci1: driver added
pci0: driver added
pci0:8:0: reprobing on driver added
pci0:9:0: reprobing on driver added
pci0:10:0: reprobing on driver added
pci0:17:0: reprobing on driver added
pci1: driver added
psm0: failed to get status (doopen).

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.