Re: Thinkpad 600E and 5.2
Cody Baker <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
I have a Thinkpad 770e (PII 266) with one of the Linksys PCMPC100 cards. It does work well in FreeBSD 4.10-stable. Do realize that you won't be able to realize true 100MB performance from one of these 16bit cards. While we're on the subject though, I can't get anything to work in 5.2.1. I continually get these watchdog timeout errors, be it a Cardbus card, or a 16bit card like the Linksys. I'm planning on tossing -current on it this weekend to see if the problem has already been solved there. If anyone has any thoughts I'd appreciate them. Thank You, Cody Baker [email protected] 330.934.0659 Gary Kline wrote: >On Wed, Jul 28, 2004 at 10:01:26AM +0400, Victor Bratsev wrote: > > >>You should look at HARDWARE.txt for devices that work with freebsd or ask >>about specific device, maybe somebody is using it. >> >>I've got TP600E with Xircom RE-100 (with some unresolved issues) under 4.7-R >>and 4.10-R >> >> >> > > (Can you describe what your "unresolved issues" are?)... . > > Good points. It seems to me that any NIC card that works on > a laptop should work on a Thinkppad. I'm looking at the > 3Com type cards and anything that uses the DEC/Intel 21143 > chipset/logic. The Linksys cards have workrd flawlessly > on four of my tower systems. > > According to the 4.8R HARDWARE.txt list there is: > > * Linksys EC2T/PCMPC100/PCM100, PCMLM56, EtherFast 10/100 PC Card, > Combo PCMCIA Ethernet Card (PCMPC100 V2) > > If anyone on -mobile has one of these on 4.8 or later > I'll try one of these. > > Anybody?? > > thanks much, > > gary > > > > > > >>----- Original Message ----- >>From: "Gary Kline" <[email protected]> >>To: "FreeBSD Mobile Mailing List" <[email protected]> >>Sent: Wednesday, July 28, 2004 9:16 AM >>Subject: Thinkpad 600E and 5.2 >> >> >> >> >>>Folks, >>> >>>Many months ago I tried a floppy install of 5.3 on my >>>HP Kayak. It poisoned. A few hours ago today I downloaded >>>the latest 5.2 floppy set nd booted my ThinkPad 600E. >>>The boot *did* see my Xircom Ethernet II adaptor, but the >>>kernel poisoned and rebooted after 15 seconds. >>> >>>Eventually I will be able to use the Xircom. But for now >>>it's time to go back to old, STABLE 4.8. Soooo, nutshell, >>>what cards will work with my ISDL CAT5 cable in 4.8? I'd like >>>the name and model and any other id regarding the card so >>>that I get it right next time. >>> >>>Thanks in advance, guys, >>> >>>gary >>> >>>-- >>> Gary Kline [email protected] www.thought.org Public service >>> >>> >>Unix >> >> >>>_______________________________________________ >>>[email protected] mailing list >>>http://lists.freebsd.org/mailman/listinfo/freebsd-mobile >>>To unsubscribe, send any mail to "[email protected]" >>> >>> >>> >>_______________________________________________ >>[email protected] mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-mobile >>To unsubscribe, send any mail to "[email protected]" >> >> > > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"