Re: 600E Audio problem (Solved!)

On Sun, Aug 22, 2004 at 04:39:22PM -0700, Kevin Oberman wrote:
> Got it! And, boy, do I feel dumb.
> 
> It turns out that the device in the 600E is a CS432X device and that
> device uses the mss driver. So just modify your kernel config to
> include:
> device		sound
> device		snd_mss
> And make sure that snd_csa is NOT present as it will see another audio
> component and try to connect to it as a CS4610. This would block the mss
> driver from finding the audio chip.
> 
> It's amazing what you find when you actually take the time to read the
> source for the drivers.


	I'm surprised that you had to actually dig into the code
	to figure this out.  (Altho lots of times reading tthe source
	is drastically easier than wading thru obscure man pages:
	*sigh*)

	Hm.  Just checked NOTES; ISA, eh?  well, you said this was
	a strange one.

	Two questions if you're still at-keyboard at 17:30-18:00.
	First, is there a way to unload the csa *.ko via cmdline?
	Second, where should this be posted?  I'll add things to
	the FBSD laptop site in the 600E section;  but anywhere
	else?

> 
> To summarize, either include devices sound and snd_mss in your kernel or
> load the snd_mss module. Do not include snd_csa! Add the following to
> your /boot/device.hints file:
> hint.pcm.0.flags="0x10"
> 

	Got it.


> That should do the trick. There is no need to edit /sys/conf/files.  It
> should probe as:
> pcm0: <CS423x-PCI> at port 0x220,0x233,0x388-0x38b,0x530-0x537 irq 5 drq 0,1 on isa0
> pcm0: [GIANT-LOCKED]
> 
> Let me know how it works for you.
'
	Will do, Kevin.  tia, of course.  I owe you one; maybe a couple:)

	gary



-- 
   Gary Kline     [email protected]   www.thought.org     Public service Unix

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"