Re: [speedstep] testers wanted (Jochen Gensch)
Eric Kjeldergaard <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
> Hi, > > On Thu, Sep 16, 2004 at 10:39:02AM -0500, [email protected] wrote: > > > > I just finished a speedstep driver for p3m and p4m but it's a little bit > > > > ugly, and worst it would work only with ich chipsets. Even worst, I > > > > don't have the hardware so I can't test it. > > > > > I'd also be happy to test if you send exactly what you want tested. Thinkpad > > R40 with p4m here. > > Yes, I was not exactly enough explicit, sorry.. > > Something like that, > > sysctl dev.ichist.0.speedstep > Should give 0 (if high frequency) or 1 (if low frequency), > then > openssl speed sha1 > sysctl dev.ichist.0.speedstep=(0 or 1, in order to change frequency) > then redo a > openssl speed sha1 > > to see if something change. > > Thanks, > > -- > Bruno Ducrot > > -- Which is worse: ignorance or apathy? > -- Don't know. Don't care. makes and installs fine. Detechts ICH4m bridge perfectly. bash-3.00# sysctl -a | grep ichist dev.ichist.0.%desc: Intel ICH4m LPC bridge dev.ichist.0.%driver: ichist dev.ichist.0.%parent: nexus0 dev.ichist.0.speedstep: 1 And now for a few quick benchmarks to show it works: dev.ichist.0.speedstep: 0 -> 0 bash-3.00# openssl speed sha1 To get the most accurate results, try to run this program when this computer is idle. Doing sha1 for 3s on 16 size blocks: 1433878 sha1's in 2.90s Doing sha1 for 3s on 64 size blocks: 984912 sha1's in 2.86s Doing sha1 for 3s on 256 size blocks: 509682 sha1's in 2.87s Doing sha1 for 3s on 1024 size blocks: 170379 sha1's in 2.86s Doing sha1 for 3s on 8192 size blocks: 23581 sha1's in 2.89s OpenSSL 0.9.7d 17 Mar 2004 built on: Tue Sep 21 01:07:22 CDT 2004 options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx) compiler: cc available timing options: USE_TOD HZ=128 [sysconf value] timing function used: getrusage The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes sha1 7898.60k 22040.86k 45465.74k 60943.57k 66811.31k bash-3.00# sysctl dev.ichist.0.speedstep=1 dev.ichist.0.speedstep: 0 -> 1 bash-3.00# openssl speed sha1 To get the most accurate results, try to run this program when this computer is idle. Doing sha1 for 3s on 16 size blocks: 768526 sha1's in 2.85s Doing sha1 for 3s on 64 size blocks: 537934 sha1's in 2.87s Doing sha1 for 3s on 256 size blocks: 282610 sha1's in 2.86s Doing sha1 for 3s on 1024 size blocks: 98091 sha1's in 2.87s Doing sha1 for 3s on 8192 size blocks: 13662 sha1's in 2.84s OpenSSL 0.9.7d 17 Mar 2004 built on: Tue Sep 21 01:07:22 CDT 2004 options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx) compiler: cc available timing options: USE_TOD HZ=128 [sysconf value] timing function used: getrusage The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes sha1 4308.26k 11980.80k 25275.55k 34956.50k 39435.07k bash-3.00# sysctl dev.ichist.0.speedstep=0 dev.ichist.0.speedstep: 1 -> 0 bash-3.00# openssl speed sha1 To get the most accurate results, try to run this program when this computer is idle. Doing sha1 for 3s on 16 size blocks: 1431234 sha1's in 2.90s Doing sha1 for 3s on 64 size blocks: 1000531 sha1's in 2.91s Doing sha1 for 3s on 256 size blocks: 528025 sha1's in 2.91s Doing sha1 for 3s on 1024 size blocks: 181941 sha1's in 2.89s Doing sha1 for 3s on 8192 size blocks: 25287 sha1's in 2.91s OpenSSL 0.9.7d 17 Mar 2004 built on: Tue Sep 21 01:07:22 CDT 2004 options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx) compiler: cc available timing options: USE_TOD HZ=128 [sysconf value] timing function used: getrusage The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes sha1 7890.36k 22019.45k 46426.83k 64513.28k 71261.79k bash-3.00# sysctl dev.ichist.0.speedstep=1 dev.ichist.0.speedstep: 0 -> 1 bash-3.00# openssl speed sha1 To get the most accurate results, try to run this program when this computer is idle. Doing sha1 for 3s on 16 size blocks: 751338 sha1's in 2.78s Doing sha1 for 3s on 64 size blocks: 471788 sha1's in 2.52s Doing sha1 for 3s on 256 size blocks: 283272 sha1's in 2.87s Doing sha1 for 3s on 1024 size blocks: 97830 sha1's in 2.87s Doing sha1 for 3s on 8192 size blocks: 13755 sha1's in 2.84s OpenSSL 0.9.7d 17 Mar 2004 built on: Tue Sep 21 01:07:22 CDT 2004 options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx) compiler: cc available timing options: USE_TOD HZ=128 [sysconf value] timing function used: getrusage The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes sha1 4323.55k 12000.71k 25240.58k 34927.47k 39729.25k bash-3.00# Looks very promising. Is the eventual plan (as Linux does) to run a daemon that modifies this setting, or as I had rather though was happening, to move acpi downclocking into a kernel module? Either way, is there any word on the implementation this particular feature? _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"