Re: Palm or equalient supported by FreeBSD

On Thu, 2004-11-04 at 11:31, Alexandre "Sunny" Kovalenko wrote:
> On Thu, 2004-11-04 at 10:38, Randy Bush wrote:
> > i am not even getting the usb entries in log
> > 
> > # kldstat 
> > Id Refs Address    Size     Name
> >  1   29 0xc0400000 38a4e8   kernel
> >  2    1 0xc078b000 6db8     linprocfs.ko
> >  3    2 0xc0792000 1eadc    linux.ko
> >  4    1 0xc07b1000 bc58     ipfw.ko
> >  5    1 0xc07bd000 5e24     snd_ich.ko
> >  6    2 0xc07c3000 1f4fc    sound.ko
> >  7    1 0xc07e3000 4338     acpi_video.ko
> >  8   15 0xc07e8000 5a808    acpi.ko
> >  9    1 0xc0843000 33bc     umct.ko
> > 10    2 0xc0847000 3508     ucom.ko
> > 11    1 0xc4452000 19000    radeon.ko
> > 12    1 0xc446b000 11000    agp.ko
> > 
> > and, when the tungsten-t is p[lugged into the usb, 
> > 
> > # usbdevs -v
> > Controller /dev/usb0:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb1:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb2:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb3:
> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
> >  port 1 powered
> >  port 2 powered
> >  port 3 powered
> >  port 4 powered
> >  port 5 powered
> >  port 6 powered
> > 
> > can someone with the working palm tungsten environment post their
> > recipe?  /etc/usbd.conf, kldstat, jpilot pref/settings/device, etc?
> > 
> > thanks.
> > 
> > randy
> > 
> > _______________________________________________
> > [email protected] mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> > To unsubscribe, send any mail to "[email protected]"
> > _______________________________________________
> > [email protected] mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> > To unsubscribe, send any mail to "[email protected]"
> First a disclaimer: I do not have working Tungsteen and even on my CLIE
> I have to resort to the serial port sync ;) However, if I am not
> mistaken, you would not see anything until you activate USB port on your
> Palm somehow (e.g. hit "HotSync" button or have some other application
> talk to it). 
> 
> On top of that, I would expect that you need uvisor.ko loaded to emulate
> serial interface.
> 
> And while we are on the subject -- anyone out there figured out what to
> do with 5.3/6.0 -- ttyUn/cuaUn devices are being created when you hit
> "HotSync" and demolished promptly after sync is done, IMHO making
> impossible to have daemon process looking out for the device.
> 
> ---
> Alexandre "Sunny" Kovalenko.
> 
> _______________________________________________
> [email protected] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "[email protected]"
Sorry, replying to myself -- you have umct driver loaded -- are you
connecting your Palm via USB-to-serial dongle? 'cause in this case you
would not see anything Palm specific in dmesg.
---
Alexandre "Sunny" Kovalenko.


_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"