Re: IRQ conflicts on RELEASE 5.2.1: Thinkpad 600x and PCM100
Joseph Olatt <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hello Richard, On Wed, Nov 24, 2004 at 12:45:21PM -0800, Richard Schilling wrote: > uname -a output: > > FreBSD 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Wed Nov 24 02:10:02 GMT > 2004 root@:/usr/obj/usr/src/sys/COGNITION i386 > > > Can someone give me a clue on how to identify IRQ conflicts on 5.2.1? Usually "/var/log/messages" or "dmesg" will inform you about IRQ conflicts. It would say something like "detected interrupt storm... throttling input..." You can also use 'kenv | grep irq' to see all the interrupts being used. > But, here's the bigger problem: > > I've been crusing around the list archives and technical documentation > for about a week now trying to get my ThinkPad 600x working with a > Linksys PCM100 card. > > I'm still getting device timeouts (which suggests to me an IRQ > conflict). Here is my system configuration: > > in /boot/loader.conf: > hw.pci.allow_unsupported_io_range="1" > hw.cbb.start_memory="0x20000000" > > > in /boot/device/hints, all references to hint.ed.0 are commented out. I > have tried setting the following values (rebooting with each change) > with no result: > > hint.ed.0.at="isa" & hint.ed.0.at="pci" > hint.ed.0.port="0x280" & hint.ed.0.port="0x100" > hint.ed.0.irq="10" & hint.ed.0.irq="3" > hint.ed.0.maddr="0xd8000" > > Any further help in getting this card working would be apprecitated. > > Thanks. > > Richard Schilling > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"