Re: Xircom Realport ethernet on FreeBSD 5.3
Cesar Mello <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hi Scott, Thank you guys a lot for the replies! > I don't know the 300CT - is this an older model with 16-bit PCMCIA (ie. not > CardBus) slots? I think so, because this is an old machine (Pentium 133 with 32 MB of RAM) I bought just to have some "mobile" processing power. :-) > If so, it might not work with the NEWCARD drivers that are > the default in 5.3. The OLDCARD framework is still supported but not in > the GENERIC kernel - you will need to build a new kernel from the OLDCARD > config file (/usr/src/sys/i386/conf/OLDCARD). That's good news. I am at work now, so I'll build a kernel with OLDCARD when I get home. > The RealPort card itself is definitely supported by the xe driver, so if we > can get your system to recognise the card it should work just fine. > Could you post a copy of /var/run/dmesg.boot from your machine to the list? > We can check if there are any PCCARD drivers being loaded and whether it's > worthwhile trying the OLDCARD kernel. I had checked the kernel messeges and found nothing with "pccard", so I guess that's the problem. To be honest, some months ago when I bought this machine, I tried FreeBSD 5.2.1 and could get the pccard driver working after building a custom kernel, but the network didn't start up anyway. So as I didn't have much time, I decided to wait for FreeBSD 5.3 and try Gentoo for a while (which worked nice but I'm not a big fan of GPL :-). Thank you a lot! Best regards, Cesar _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"