Re: Xircom REM56G-100 on 5.3
Scott Mitchell <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Tue, Dec 28, 2004 at 01:37:34PM +1100, Dave Horsfall wrote: > On Mon, 27 Dec 2004, Scott Mitchell wrote: > > > The modem part should work with the sio driver, although you won't be able > > to use both the Ethernet and modem together with an OLDCARD kernel (not the > > default on 5.3 so you're probably running a NEWCARD kernel). Do you see > > any extra sio ports showing up in dmesg output? > > No, I don't. It's not an issue anyway, as I managed to get USB-serial > cables to work instead. Of course, the modem port may not actually work, > as I got the card for free... > > So you're saying that card-modems should "just work"? I might buy one, in > that case. In general, yes - any card that claims to be a serial device should be picked up by sio. On the other hand, getting multiple functions on the same card to work at the same time is often tricky. It's possible that the last round of work I did on the xe driver broke sio probing on these cards... will take a look and fix it if necessary. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"