More WiFi Access Point Discovery

[email protected] (Gary E. RAFE, Ph.D.)
Newsgroups gmane.os.freebsd.devel.mobile
Organization Rouillard & Rafe
Message-ID <[email protected]>
I'm still trying to determine how to get WiFi access point discovery
to work on my Toshiba Satellite Pro 6100 running 5.3-R.
The (custom) kernel has devices "wlan" and "wi" compiled in.

At boot-time, the kernel reports the internal MiniPCI WiFi card as:

wi0: <TOSHIBA Wireless LAN Card> at port 0xd000-0xd03f irq 11 function 0 config 1 on pccard0
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.72.1)
wi0: Ethernet address: 00:02:2d:XX:XX:XX
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

while "ifconfig wi0" reports:

wi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        ether 00:02:2d:XX:XX:XX
        media: IEEE 802.11 Wireless Ethernet autoselect (none)
        ssid ""
        stationname "FreeBSD WaveLAN/IEEE node"
        channel -1 authmode OPEN powersavemode OFF powersavesleep 100
        rtsthreshold 2312 protmode CTS
        wepmode OFF weptxkey 1

When my USR2410 PCCARD is inserted into an available slot,
the kernel reports:

wi1: <U.S. Robotics IEEE 802.11b PC-CARD> at port 0xd040-0xd07f irq 11 function 0 config 1 on pccard2
wi1: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi1: Intersil Firmware: Primary (0.3.0), Station (0.7.6)
wi1: Ethernet address: 00:90:d1:XX:XX:XX
wi1: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

and "ifconfig wi1" reports:

wi1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        ether 00:90:d1:XX:XX:XX
        media: IEEE 802.11 Wireless Ethernet autoselect (none)
        ssid ""
        stationname "FreeBSD WaveLAN/IEEE node"
        channel -1 authmode OPEN powersavemode OFF powersavesleep 100
        rtsthreshold 2312 protmode CTS
        wepmode OFF weptxkey 1

Both cards report "0 stations" with "wicontrol -i wiX -l",
although our local WiFi access point, situated across the room,
is powered on and active.
In the case of "wicontrol -i wiX -L",
the listing ends with the line:
SSID                        BSSID         Chan     SN  S  N  Intrvl Capinfo
for the wi0 (MiniPCI), while wi1 (USR2410) does *not* report this line.

Is there some "magic" I'm missing to make this work,
or is access point discovery not something these WiFi devices do ?

In the case of the latter, can someone suggest a supported PCCARD
that does reliable access point discovery with FreeBSD ?
--
Gary E. RAFE, Ph.D.	<mailto:[email protected]>
Please do not send me HTML-encoded mail.
It will be discarded automatically.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.