Re: dc no worky with <Xircom X3201 10/100BaseTX>, also LOR

On Wed, 16 Feb 2005, M. Warner Losh wrote:

> Dan,
>
> My Xircom cardbus cards work here for me, and I didn't see anything
> odd enough to explain WHY things went south, only that they did.
> Which one is the X3201?  Maybe I don't see this because I'm trying the
> wrong cards or don't yet own one (shocking, I know!).

I'd like to copy Bill Paul on this, but am gun-shy ;-)

I found an older Xircom CardBus Ethernet II adapter that worked.
I know it's not a bad adapter because:

  1) I've two of them (both shrink-wrapped and brand new)
  2) They work under Windows on the same laptop(s).

The older Xircom is identically marked - CBE2-100.  I can
see no physical differences between the older Xircom and the
two newer Xircoms.

To summarize, these are the cards I have tried:

  (A) - Xircom RealPort CardBus Ethernet II 10/100 + Modem 56
        -- works

  (B) - Xircom CardBus Ethernet II 10/100, CBE2-100, old
        -- works

  (C) - Xircom CardBus Ethernet II 10/100, CBE2-100, new, qty 2
        -- neither work

When I boot verbose, the only difference I see between (B)
and (C) is that (B) has a powerspec of 1, while (C) has a
powerspec of 2:

  (B) powerspec 1  supports D0 D1 D2 D3  current D0
  (C) powerspec 2  supports D0 D1 D2 D3  current D0

Full boot messages available on request.

 -- (B) Old Xircom, works

 pcib2: device cardbus0 requested decoded memory range 0xf4000000-0xfbffffff
 pcib2: device cardbus0 requested decoded memory range 0xf4000000-0xfbffffff
 pcib2: device cardbus0 requested decoded I/O range 0xe000-0xffff
 found->    vendor=0x115d, dev=0x0003, revid=0x03
 bus=4, slot=0, func=0
 class=02-00-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
 lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
 intpin=a, irq=222
 powerspec 1  supports D0 D1 D2 D3  current D0
 dc0: <Xircom X3201 10/100BaseTX> port 0xe000-0xe07f mem 0xf4002000-0xf40027ff,
   0xf4002800-0xf4002fff irq 10 at device 0.0 on cardbus0
 pcib2: device dc0 requested decoded I/O range 0xe000-0xe07f
 miibus0: <MII bus> on dc0
 tdkphy0: <TDK 78Q2120 media interface> on miibus0
 tdkphy0: OUI 0x00c039, model 0x0014, rev. 11
 tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 dc0: bpf attached
 dc0: Ethernet address: 00:10:a4:8a:17:17
 dc0: if_start running deferred for Giant
 dc0: [GIANT-LOCKED]

 -- (C) Newer Xircoms, don't work

 pcib2: device cardbus0 requested decoded memory range 0xf4000000-0xfbffffff
 pcib2: device cardbus0 requested decoded memory range 0xf4000000-0xfbffffff
 pcib2: device cardbus0 requested decoded I/O range 0xe000-0xffff
 found->    vendor=0x115d, dev=0x0003, revid=0x03
 bus=4, slot=0, func=0
 class=02-00-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
 lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
 intpin=a, irq=222
 powerspec 2  supports D0 D1 D2 D3  current D0
 dc0: <Xircom X3201 10/100BaseTX> port 0xe000-0xe07f mem 0xf4002000-0xf40027ff,
   0xf4002800-0xf4002fff irq 10 at device 0.0 on cardbus0
 pcib2: device dc0 requested decoded I/O range 0xe000-0xe07f
 dc0: MII without any PHY!
 lock order reversal
 1st 0xc1b67d40 dc0 (network driver) @ /opt/FreeBSD/src/sys/pci/if_dc.c:2358
 2nd 0xc07c9800 ACPI root bus (ACPI root bus) @ /opt/FreeBSD/src/sys/dev/acpica/acpi.c:1050
 KDB: stack backtrace:
 kdb_backtrace(0,ffffffff,c07dfb08,c07e0d50,c07a88ac) at kdb_backtrace+0x29
 witness_checkorder(c07c9800,9,c0741eb5,41a) at witness_checkorder+0x54c
 _sx_xlock(c07c9800,c0741eb5,41a,d36cea04,c05af97c) at _sx_xlock+0x50
 acpi_release_resource(c1979a00,c1bdf380,1,0,c1b81c80) at acpi_release_resource+0x26
 bus_generic_release_resource(c1a46580,c1bdf380,1,0,c1b81c80) at bus_generic_release_resource+0x64
 resource_list_release(c1c24504,c1a46980,c1bdf380,1,0) at resource_list_release+0x6e
 bus_generic_rl_release_resource(c1a46980,c1bdf380,1,0,c1b81c80) at bus_generic_rl_release_resource+0x5e
 bus_generic_release_resource(c1a4c180,c1bdf380,1,0,c1b81c80) at bus_generic_release_resource+0x64
 resource_list_release(c1c24504,c1a4ca00,c1bdf380,1,0) at resource_list_release+0x6e
 bus_generic_rl_release_resource(c1a4ca00,c1bdf380,1,0,c1b81c80) at bus_generic_rl_release_resource+0x5e
 cbb_cardbus_release_resource(c1a4cc00,c1bdf380,1,0,c1b81c80) at cbb_cardbus_release_resource+0x98
 cbb_release_resource(c1a4cc00,c1bdf380,1,0,c1b81c80) at cbb_release_resource+0x42
 resource_list_release(c1c24504,c1a57400,c1bdf380,1,0) at resource_list_release+0xfb
 bus_generic_rl_release_resource(c1a57400,c1bdf380,1,0,c1b81c80) at bus_generic_rl_release_resource+0x5e
 bus_release_resource(c1bdf380,1,0,c1b81c80) at bus_release_resource+0x61
 dc_detach(c1bdf380) at dc_detach+0xb2
 dc_attach(c1bdf380) at dc_attach+0xe20
 device_attach(c1bdf380,0,c1bdf380,c1c24500,0) at device_attach+0x58
 device_probe_and_attach(c1bdf380,c1c24500,c1a57400,c1bdf380,c1a57400,c1bdf380) at device_probe_and_attach+0xe0
 cardbus_attach_card(c1a57400) at cardbus_attach_card+0x1ae
 cbb_insert(c1a73800) at cbb_insert+0xd2
 cbb_event_thread(c1a73800,d36ced48,c1a73800,c04fddb4,0) at cbb_event_thread+0x129
 fork_exit(c04fddb4,c1a73800,d36ced48) at fork_exit+0xa4
 fork_trampoline() at fork_trampoline+0x8
 --- trap 0x1, eip = 0, esp = 0xd36ced7c, ebp = 0 ---
 device_attach: dc0 attach returned 6


_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"